2Entry Helios secondary switch
The purpose of this module is to extend the 2entry helios door communicator with anotherswitch, e.g., for switching the electric door to be locked. Comparing it to the previous switchversions this one contains several modifications.
It gives you features like unlimited timeswitching or permanent switch during the time of the call. Thanks to the switching element -metallic surge memory relay - is now possible for switching to low voltage logical inputs of e.g.gate and barrier control systems. Both normally open (NO) and normally closed (NC) contactsare available.
Make sure that before installing the module the current consumption and rated voltage of theequipment is switched to lock and are within the ranges of the admissible switch current andvoltage values .In no case use this module for mainsvoltage switching!
1. Remove the screw from the left bottom side of the main communicator board.
2. Insert the switch connector onto the contact moulding (next to the whole for screw).
3. Between the communicator main board and the switch board, insert a spacer ring andhold the board tightly together to the plastic back using screw provided with the switch
To Know about 2Entry Helios secondary switch Please click here