Bump Test Stations - BTS-HP Series
The BTS-HP Bump Test Stations are used with high pressure/large volume gas cylinders providing a cost effective solution for bump testing/response testing gas detection instruments in the workplace.
The one button operation allows workers to test their gas detection instruments quickly and efficiently by simply pushing the green button. Each outlet is independent so gas flow is controlled by the individual push buttons.
The system design uses a single gas cylinder mixture and distributes the gas to two, four, six or more outlets. The large volume cylinders reduce the cost of gas considerably.
A programmable timer allows the gas to flow for 1-60 seconds. Once the flow rate is set to your requirement the cabinet is locked and no further adjustments are necessary.
BTS-HP System consists of:
- Two, four or six Channel wall mounted station (others available)
- Large volume cylinders. Available in 750litre ,1500, 3,000 or 7,500 litre
- Regulator to reduce pressure to station
- Stainless Steel gas hosing to connect regulator to Station.
Special designs with multiple gas mixture inlets and multiple gas outlets are available upon request. These can be designed to meet specific requirements.
Dräger Bump Test Station for Portable Gas InstrumentsSend Request
Industrial Scientific Corporation-CalPlusSend Request
Automated Test System | GALAXY® GX2Send Request
Automated Instrument Docking Station | MicroDock IISend Request
Test Gases & Equipment - Calgaz RangeSend Request
LPG Supply | Forklift Gas | Premium Gas from ElgasSend Request