Case Erector & Bag Inserter - Combi Plast

A perfect packaging solution for all those companies packing products which should not dry out or should actually be protected from moisture or dust.

A case erecting technology whereby the case is picked up from the magazine by the vacuum suction frame which holds it firmly on two sides. Then the bottom flaps are folded in while the case is stationary.

All movements are directed towards the case, your guarantee for a perfect square case. From there the Niverplast technology takes over. A clever vacuum system takes a bag from the magazine and the placer-spreader unit positions the pre-fabricated bag neatly into the erected case reaching all four corners.

The bag is made to measure for your specific purpose, not too large and not too small. The result: lower cost and a box with a bag, ready to be filled.