Fig 80 Deadweight Tester Aids Pipeline Testing

The figure 80 deadweight testers provide accurate measurement for pipes and vessels including hazardous areas - because of it's purely mechanical operation. The unit features an integral large, easy to read, precision mechanical pressure gauge.

Applications of Fig 80 deadweight tester  include:

• Well heads, where it measures well head gas pressure and hydraulic test pressures of riser pipes.
• At gas terminals, it monitors gas pressures associated with flow metering.
• On pipelines, it measures pressures on leak & yield testing as well as frictional pressure losses.
• In thermal power stations it is used to accurately measure steam pressures for efficiency testing.

Four versions are available:

a. Figure 80: Pressure ranges 30 - 300 bar  or

b. 30 - 600 bar, with standard accuracy  0.07% of FS (with optional range extension an 800 bar model is also available)

c. Figure 80L: 7 -60 bar or

d. 7 -120 bar, with standard acccuracy 0.015% of FS

The unit dimensions are 320 x 310 x 325mm. The tester weighs 25.5 kg and weights 75 kg and is complete with accessories, polished wood carrying cases & instruction manual bound with Certificate of Accuracy.

DH Budenberg poducts are represented by WIKA Australia Pty Ltd.

For further information about Fig 80 deadweight tester visit WIKA Australia at http://www.wika.com.au
OR
Use the IndustrySearch e-mail feature below and one of the WIKA Australia team will respond to your enquiry directly.