The 3101 Dry-Well temperature calibrator is a portable sub zero temperature source, of a handy compact size, 89 x 152 x 186mm and a weight of only 1800 grams.
3101 Dry-Well Temperature Calibrators feature an easy to read LED display with a range of -10 to +110C, a resolution of 0.1C and an accuracy of +/- 0.5C. Heating time from ambient to +100C and cooling time to ambient is 10 minutes for both.
The 3101 Dry-Well Temperature Calibrator is excellent for checking the calibration of a wide range of instrumentation including digital thermometers and sensors requiring calibration checks both above and below ambient.
The 3101 unit has two wells, both 13mm in diameter and will accept removable inserts for most sensors.
The 3001 heat source is even more compact, measuring only 57 x 125 x 158mm and weighing a mere 900 grams.
The 3001 unit covers a range of +33 to +300C. The accuracy is +/- 0.5C for temperatures in the range of +33 to +199C and has an accuracy of +/- 1.0C in the temperature range of +200 to +300C.
The unit comes with a 5 hole well and will accept probe diameter sizes of 3.3, 4.0, 4.7 and 6.35mm
Model 3004 differs from the above only by the fact that it has a single well, that will accept probes up to 9.6mm in diameter.
For further information about Low Cost Dry Block Temperature Calibrators visit Ross Brown Sales at http://www.rossbrownsales.com.au
Use the IndustrySearch e-mail feature below and one of the Ross Brown Sales team will respond to your enquiry directly.