Monster Heavy Duty Mining Wheel Chocks
Checkers 3000 series Monster Heavy Duty Wheel Chocks are specifically designed for the mining and construction sector with vehicle weights up to 725 tonnes.
Monster Off-road Urethane Wheel Chocks are made of tough damage resistant polyurethane and most importantly and a solid lightweight structural urethane core surrounded by a hard polyethelyne case making the chock life far greater than standard urethane construction...the chocks will not cause tyre damage and are virtually unaffected by oils, fuels and solvents. For added safety and convenience, "How to Use" guidelines are moulded into the back of each chock.
- MC3009 - recommended for mine support equipment up to 111 tonne (when used in pairs) with tyres up to 1.66m in diameter.
Length - 381mm, Width - 384mm, Height 280mm, weight - 6.6kg
- MC3010 - recommended for mine haul trucks with tyres sizes up to 2.66m diameter and total Gross weight of up to 250 tonne (when used in pairs)
Length - 450mm, Width - 387mm, Height - 254mm, Weight - 8.8kg
- MC3011 - recommended for mine haul trucks with tyres sizes up to 4.2M in diameter and total gross weight up to 387 tonne (used in pairs) or 725 tonne (when 4 chocks are used). Tall chock design for unusually steep grades
Length - 625mm, Width - 369mm, Height - 407mm, Weight - 19.1kg
- MC3012 - recommended for mine haul trucks with tyres sizes up to 3.6M in diameter and total gross weight up to 387 tonne (when used in pairs)
Length - 557mm, Width - 379mm, Height - 270mm, Weight - 17.7kg