Power Team Toe Jacks and Inflatable Jack

Power Team toe jacks

With lifting points on the toe and on the top, these extremely rugged jacks are ideal for machine lifting, rigging, lift truck service and much more.

• Choose from 5.5-ton, 11-ton, and now, an amazing 27.5-ton lifting capacity.
• All jacks operate both vertically and horizontally.
• All jacks meet ASME B30.1 standards and carry the Power Team Marathon Lifetime Warranty.
• Base, toe and pumping assembly swivel independently, allowing the jack to work in confined areas.

For further technical information on the power team toe jacks please click here. 

Economy toe jacks

These bottle jack-style toe jacks are loaded with many of the same features as our standard bottle jacks, but the toe-lift feature and swivelling pump handle socket make them ideal for machinery lifting and positioning.

• An internal pressure relief provides added safety by limiting the jack's lifting capability to the capacity of the toe.
• Spring return is an added feature on the larger jacks.
• All jacks meet ASME B30.1 standards and carry the Power Team Marathon Lifetime Warranty.
• Swivelling pump handle assembly available on the 5- and 10-ton models.
• The swivelling jack assembly allows you to access and pump the unit from numerous positions.

For further technical information on the economy toe jacks please click here

Inflatable jacks

Highly flexible and light weight jacks only require an air supply of 8 bar maximum. Any non-explosive gas or water can also be used for inflation.

• Uninflated jacks are only 25.4 mm thick, making seemingly impossible lifting tasks routine.
• Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 12 bar.
• In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 8 bar.
• Large surface area and material flexibility allows jacks to lift loads on soft or compressible surfaces without support cribbing being necessary.
• Safety first – the controller, shut-off and air hoses are all equipped with USA industrial interchange style air couplers. Female half coupler bodies have a locking collar, protecting operator from accidentally disconnecting jack while under load.
• Surface of jack has a non-skid pattern, assuring that the jack won’t ‘walk away’ from the job. Jacks can be used to lift a load from an uneven surface, are tolerant of side-loaded applications.
• Non-conducting material resists oil, ozone and most chemicals. Cold resistant down to -40 degrees C, heat resistant up to 115¡ C (short term) or 93¡ C (long term).
• Field-replaceable nipples are made of tough steel, with internal thread to prevent abrasion damage. Ideal needle aperture of 6.4 mm allows rapid inflation, without risk of icing, and permits a safe lowering speed.
• Single jack controller with dead man control (3500090). Can be used individually, or in multiples to regulate any number of jacks desired.
• Heavy attachment straps are provided on 4 largest sizes for attachment of a rope or hook to position the jack from a safe distance.
• Inflation hose system is colour-coded (red and yellow) for easy recognition when using more than one jack.

For further technical information on the economy toe jacks please click here