JLG Industries (Australia) -
Articulating boom lifts (knuckle booms) are used for reaching up and over machinery, equipment, and other obstacles mounted on floors, and for reaching other elevated positions not easily approached by a straight (telescopic) boom lift.
The machine's turntable may be rotated 360 degrees in either direction. The boom can be raised or lowered from vertical to below horizontal, and extended (telescoped) while the work platform remains horizontal and stable.
It can be manoeuvred forward or backward and steered in any direction by the operator from the work platform, even while the basket is elevated.
All articulating models are driveable at full elevation and have chassis widths that provide access to narrow industrial aisleways and congested work areas.
- Platform heights are available from 45 ft (13.72 m) to 150 ft (45.72 m) including the 150HAX, the world´s largest self-propelled articulating telescopic boom lift
- Operator controls common to the 450 Series II, 600 and 800 series lifts
- Fast lift and drive speeds enhance operator productivity
Typical Applications of 1250AJP Articulating Boom Lift
- Building construction and maintenance
- Mechanical, electrical, utility and painting contractors
- Manufacturing and industrial facilities (steel, automotive and aircraft plants)
- and chemical refineries
- Textile, food processing and fabricating plants and entertainment facilities
- Rough terrain job sites
- Up-and-over applications
1250AJP Articulating Boom Lift
- Larger working range with an up-and-over height of 60 ft 6 in. (18.44 m) and horizontal outreach of 63 ft 2 in. (19.25 m)
- Faster cycle speeds allowing the operator to go from full elevation of 125 ft (38.1 m) to the ground in 95 seconds.
- Automatic platform leveling
- Optimum maneuverability with standard 4-wheel steer. Three steering modes are available: 2-wheel steer, 4-wheel coordinated or crab steering. The Ultra Booms feature the tightest turning radius and an industry best 1 : 1 crab steer ratio
Standard Features of 1250AJP Articulating Boom Lift
- Platform: 36 x 96 in. (0.91 x 2.44 m) Side Entry
- Selectable Capacity Envelope
- Inward Self-Closing Swing Gate
- 180 Degrees Hydraulic Platform Rotator
- AC Receptacle in the Platform
- SkyPower® Package
- 7500 Watt Generator
- 240/120V Single Phase
- 240V 3 Phase
- 1/2 in. Air Line to Platform
- 5 degree Tilt Alarm/Indicator Light
- All Motion Alarm
- Swing-Out Engine Tray
- 12V DC Auxiliary Power
- Hourmeter
- Control ADE® System
- Full-time 4WD
- 3 Selectable Steering Modes
- Drive-out Extendable Axles
- Oscillating Axle
- Proportional Controls
- Gull-Wing Hoods
- Operator Tool Tray
- 445-50D710 Foam Filled Rim Protector Lug Tread Tires
- Platform Console Machine Status Light Panel*
- Lifting/Tie Down Lugs
- Engine Distress Warning/Shutdown-Selectable via JLG Analyzer
- 8 ft (2.43 m) Vertical and Lateral Articulating JibPLUS® Boom Feature
*Provides indicator lights at platform control console for system distress, fuel level, low fuel, 5 degree tilt light and foot switch status.
More Information & Specifications about 1250AJP Articulating Boom Lift >>
