Measure-Tech Australia -
Did you ever wish that your temperature measurements could be made a little easier, in clear digits with a better accuracy, or even over a wider range without worrying about breakage or condensation?
Checktemp might just be what you've been looking for!
It gives you the temperature read-out from -50 to 150°C or -58 to 302°F in seconds on a large Liquid Crystal Display with ±0.3°C or ±0.5°F accuracy. NO breakage, NO waste, NO injuries, NO difficulty in reading. Not even a parallax error by taking a wrong measurement due to the angle of view!
The new Checktemp L is now available featuring a rounded probe tip ideal for measurements in liquid.
Calibration Check Feature
One thing you could say about glass thermometers is that they give a sense of false certainty about the temperature because one can see the physical expansion of the liquid inside the glass! Electronic thermometers have at times been likened to a black box. One is never sure if the display is correct.
Well, we've solved this problem too. Checktemp has the world's first cal-check feature. There is a switch under the battery cover which sends a 0.0°C ±0.3°C (32.0°F ±0.5°F) signal to the display. This way you are always sure about the accuracy of your readings and if necessary can manually compensate for any deviation in calibration.
The comparison chart below clearly shows that a Checktemp thermometer is the wisest choice for your routine temperature measurements.
*Factory Calibration Certificates
You can also have your thermometer calibrated against an NIST standard. To do this, simply add an "N" to the end of the code when ordering.
-
Durability - Rugged ABS housing.
-
Ease-of-Transport - No protection required.
-
Fast Response Time - Checktemp provides a reading within 20 seconds.
-
Easy to Read - LCD readable at any angle.
More Information on Checktemp & Checktemp L Better Accuracy than Glass Thermometers over a Wider Range and Made of Stainless Steel >>
