Dominion Electronics -
The EK4 is a starter kit that allows evaluation of the functions of the PP1 PCI-104 module. The kit consists of the standard CPU module, the carrier card with I/O connectors, DRAM memory, an external PSU, SA-Adapter™ kit (USB, dual CAN), Ethernet adapter D-Sub to RJ45 and an RS232 Y-adapter. The EK4 provides versatile mounting options and can also be installed in a standard PC.
The PP1 is an industrial computer which is designed to operate under harsh environmental conditions. It complies with the PCI-104 specification and can be stacked with other PCI-104 boards or mounted on different types of carrier boards.
Features
• PP1 with MPC5200 / 384 MHz
• 128 MB SDRAM
• 16 MB Flash, 64 KB FRAM
• 1 Fast Ethernet, 2 COMs, 2 CAN bus
• ATX-compatible carrier card:
• 1 PCI-104 slot, 1 PCI slot
• Accessories:
• External PSU
• SA-Adapter™ kit USB, 2x CAN
The PP1 is controlled by a MPC5200 PowerPC® that operates at 384 MHz. It provides 128 MB SDRAM for data and 16 MB Flash memory for program storage as well as 64 KB FRAM. The bus interface is a 32-bit, 33-MHz PCI bus. The PP1 provides two optically isolated RS232 and one Fast Ethernet interface at its front panel. Two CAN controllers are included in the MPC5200. The physical CAN interface can be located on SA-Adapters™ or on the carrier board. The board also features a real-time clock and watchdog.
The carrier board has an ATX-compatible format and provides the mechanical platform, the power supply and the I/O connectors. It comes with one PCI-104 slot and two PCI slots, which allow the use of standard extension cards in the PC. The ESM™ carrier also features an I2C EEPROM for the board ID and revision information.
Technical Data
PCI-104 Carrier Card
One PCI-104 slot
J1 assembled
PCI interface
• Two PCI slots
• 32-bit/33-MHz, 5V V(I/O)
PCI-104 Module PP1
CPU
• PowerPC® MPC5200
• 384MHz
Memory
• 128MB SO-DIMM SDRAM, soldered
• 16MB Flash
• 64KB non-volatile FRAM
I/O
• 10/100Base-T Ethernet, 9-pin D-Sub at front panel
• RS232 serial interface (COM1/2), 9-pin D-Sub at front panel
• USB 1.1, via SA-Adapter™ on I/O connector P2
• Two independent CAN interfaces, via SA-Adapters™ on I/O connector P2
• Display interface: Four characters, 5 by 7 pixels
• 8 GPIO lines, via I/O connector P2
PCI Interface
• 32-bit/33-MHz PCI interface at PCI-104 connector J1
• Compliant with PCI Specification 2.2
Accessories
External PSU
SA-Adapter™ kit (USB, dual CAN)
Ethernet adapter D-Sub to RJ45
RS232 Y-adapter
Electrical Specifications
Supply voltage/power consumption:
• +24V (-35%/+50%), 1.6A
MTBF PP1: 450,000h @ 40°C (derived from MIL-HDBK-217F)
Mechanical Specifications
Dimensions:
• Carrier: conforming to Mini-ATX standard (PCB: 170mm x 150mm)
• PP1: conforming to PCI-104 specification
Weight:
• Carrier: 200g
• PP1: 90g
Environmental Specifications
Temperature range (operation):
• 0..+60°C
• Industrial temperature range on request
• Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
BIOS
MENMON™
Software Support
VxWorks®
Linux
CANopen firmware (Vector Informatik)
CANopen support: MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, RTX, OS-9®)
MSCAN/Layer2 support: MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, RTX, OS-9®)
