Compressed Air Australia -
Chip Vac - Drum Vac - Vac-u-Gun - Deep Hole Vac-u-Gun - Window Blowoff.
Chip Vac™ - Vacuums chips directly into a 45 imp. gallon drum - with no moving parts!
EXAIR's Chip Vac picks up dry or wet chips and delivers them directly to an ordinary 55 gallon (45 imperial gallon/205 litre) drum. Chip Vac is used to clean chips from fixtures, floors and work surfaces of machining centres, lathes, saws, mills and other industrial equipment. Now, with a 30% increase in vacuum, it is our most powerful Chip Vac ever!
Drum Vac™ - Pump 45 imp. gallons in 90 seconds!
Two way pumping action.
EXAIR's compressed air operated Reversible Drum Vac System attaches quickly to any closed head 30 or 55 gallon (45 imperial gallon/205 litre) drum. Its high powered vacuum fills the drum in less than two minutes. With the simple turn of a knob, the same stainless steel pump quickly empties the drum. Coolant sumps can be easily refilled, floor spills vacuumed, or contaminated liquids transferred to filtration tanks in minutes. The flow rate in and out of the drum can be controlled with the knob, making it ideal for dispensing liquids.
Electrically operated "all purpose" vacuums aren't designed for use in industrial environments. As a result, motors wear out quickly and impellers clog. The Reversible Drum Vac does not use electricity and has no moving parts, assuring maintenance free operation. An automatic safety shutoff valve prevents spills or overfilling.
The Model 6296 Deluxe Reversible Drum Vac includes a Model 6901 Spill Recovery Kit and drum dolly.
Vac-u-Gun™ - Vacuum, blow and transfer with no moving parts!
The Vac-u-Gun is a low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun is a vacuum gun, a blow gun and a transfer tool all-in-one. Lightweight and easy to use, the Vac-u-Gun has durable die cast construction with no moving parts to wear out.
The Vac-u-Gun uses less compressed air than an ordinary blow gun. It injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output flow on the other. The amplified output flow is 12 times the air consumption rate.
Deep Hole Vac-u-Gun™ - Blow chips loose and vacuum them away in one step! Ideal for cleaning cavities and drilled holes!
What Is The Deep Hole Vac-u-Gun?
A low cost solution to quickly removing chips and contaminants from grooves, containers and drilled holes. The Deep Hole Vac-u-Gun replaces dangerous blow guns that can cause chips or debris to fly in all directions. Simply position the Deep Hole Vac-u-Gun over the hole and press the trigger. A small blow tube dislodges and lifts the chips while the large suction tube vacuums them away. The operator is protected from flying debris since all contaminants are contained within the clear suction tube. It is perfect for cleaning holes up to 1-1/4" (32mm) diameter at a depth of 18" (457mm).
The Deep Hole Vac-u-Gun uses less compressed air than an ordinary blow gun. It injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output flow on the other. The amplified output flow is 12 times the air consumption rate.
Model 6394 Deep Hole Vac-u-Gun System removes the chips from a drilled plastic part.
Lightweight and easy to use, the Deep Hole Vac-u-Gun has a durable die cast construction with no moving parts to wear out. A hanger is provided for easy storage or for mounting on a tool balancer.
Window Blowoff - Keep the window of your machine clear of coolants!
View the part and the process at all times!
EXAIR’s new Window Blowoff Systems give the machine operator a clear view of the part and the machining operation when coolants or cutting fluids are used. The machinist can then make decisions affecting the part and process, resulting in faster machine set up and increased productivity. Tool damage and unnecessary downtime can be eliminated.
To keep up with the constantly increasing feeds and speeds of today’s machine tools, high volumes of flood coolant must be used. As a result, a heavy coolant spray is often thrown against the window that eliminates visibility of the part and the machining process. The Window Blowoff gives an unobstructed view to the inside of the machine.
The Air Stik is ideal for open or closed top machines. It provides a directed, high velocity sheet of air to blow down the surface of the window. The Air Disk works best in closed top machines. Using EXAIR’s patented airflow technology, the Air Disk Window Blowoff provides a 360° airstream that blows outward from the center of the window.
