| |
|
YAMATAKE SVP3000 Alphaplus Smart Positioner
High accuracy smart valve positioner gets the best processing performance out of control your valves. | | |
|
YAMATAKE offers the smallest gas chromatograph in the world
The world is turning increasingly to natural gas as a primary energy source. Much of the infrastructure is already in place, with a network of pipelines delivering natural gas to parts of Australia. | | |
|
 Beamex MC3 Temp-Electrical Calibrator
The BEAMEX MC3TE, Temperature-Electrical Calibrator is supplied with Temperature section and Electrical section. | Beamex - High quality calibration equipment
Beamex develops, manufactures, and markets high-precision, high-quality calibration equipment and systems to provide solutions to meet the demands of compliant agencies like FDA, ISO, OSHA, etc. |  Beamex® MC5 Calibrator
Beamex® MC5 Calibrator chosen by Eurotherm for site calibration of Aerospace pyrometry instrumentation to NADCAP regulations and AMS2750D |  Safe & Practical Field Calibration With The New Beamex® MC2-IS
Intrinsic safety (IS) is a protection technique for safe operation of electronic equipment in explosive environments. An intrinsically safe calibrator is therefore designed to be incapable of causing ignition in the surrounding environment with flammable materials, such as gases, mists, vapors or combustible dust. Intrinsically safe calibrators are designed for use in potentially explosive environments, such as oil refineries, rigs and processing plants; gas pipelines and distribution centres; petrochemical and chemical plants, as well as pharmaceutical plants. |
 Interface Model T1 Torque Coupling Rotary Torque Transducer
The Interface Model T1 Torque Coupling Rotary Torque Transducer integrates torque measurement with a robust double flex coupling. |
| |
|
 TORBAR Averaging Pitot Tubes
The TORBAR is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement. The TORBAR produces an averaged differential pressure (DP) signal proportional to the square of the flow rate. This DP output is normally piped to a differential pressure transmitter in order to generate an electrical signal proportional to the flowrate. |  FCI Mass Flow Instruments
Highly accurate flow measurement combined with advanced communication bus flexibility are now available from Fluid Components Intl with the addition to its mass flow instrument product lines of five popular communication buses: HART, Ethernet, Profibus, MODBUS and ASI. |  FCI RELEASES THE ST50-1 AND ST75-1 FLOWMETERS
The FCI ST50-1 and ST75-1 Flow Meters are an accurate, easy to install solution for measuring and controlling air, compressed air or nitrogen flow. |  YAMATAKE MagneW Magnetic Flowmeters
Yamatake, represented in Australia by AMS Instrumentation and Calibration, continues to slash installation costs with the versatile MagneW Two-Wire PLUS Magnetic Flowmeter. |
 YAMATAKE ST3000 Smart Transmitters
Proving that YAMATAKE is on the cutting edge when it comes to the 3 measurements essential to process control - flow, pressure and temperature – YAMATAKE offers a range of smart and compact transmitters. The Series 900, PTG and ATT all deliver unsurpassed performance. |  YAMATAKE - range of fieldbus devices
Yamatake has released a series of Fieldbus devices that comply with the latest FOUNDATION TM
Fieldbus specifications.
The series includes pressure/differential pressure transmitters, an electromagnetic flowmeter
and a smart valve positioner.
|
YAMATAKE SVP3000 Alphaplus Smart Positioner
High accuracy smart valve positioner gets the best processing performance out of control your valves. |  Determination of the Efficiency of a Solar Plant with Flexim Ultrasonic Flowmeters
Description |
Non-Invasive Gas Flow Measurement - FLUXUS® G
FLUXUS® G Stands its Ground in the Industrial World |  Electromagnetic Flowmeter - Yamatake MagCUBE
The YAMATAKE MagCUBE is an electromagnetic flowmeter designed specifically for water applications and has recently been updated. Based on field-proven Yamatake technologies, the YAMATAKE MagCUBE provides cost-effective flow measurement with features required in water applications. |
Flow Meter & Level Measurement Product & Services Catalogue in CD ROM
FCI’s New CD Catalogue Puts Latest Flow & Level Measurement Information in the Palm of Your Hand |  Remote Mount Thermal Mass Flow Meter
Economical Remote Mount Thermal Mass Flow Meter For Hazardous Areas or Hard To Reach Locations |
 FCI Mass Flow Meter Optimized for Wastewater Treatment Digester Gases
New FCI Mass Flow Meter Optimized for Wastewater Treatment Digester Gases-- Delivering High Accuracy At Lower Cost |  New FCI Mass Flow Meter Optimized For Biofuel and Biomethane Applications
Biogas, Biogas Fueled Co-Gen Engines, On-Farm and Fermentation Biogas Systems, Landfill Methane Recovery, Coal Mine Methane Recovery, Municipal and Industrial Wastewater Treatment Digesters |
| |
|
 IRCON STINGER THERMAL IMAGING CAMERA
Ircon’s new Stinger thermal imaging camera is designed to deliver the highest quality real-time video temperature representation of your process. By combining the latest in digital camera technology with uncooled Focal Plane Array sensor technology and heavy-duty enclosures, the IRCON Stinger performs exceptionally – and survives long-term – in any industrial process control application. | | |
|
Interface MCC Series Miniature Compression Load Cells
Interface has released the new MCC Series Miniature Compression Load Cells. | | |
Pressure / Level / Temperature Transmitters | back to top |
|
 PMC “Dip Stick” Level Transmitter
The new PMC model DS series “Dip Stick” level transmitter is designed for top mount locations in tanks up to 10 ft. deep. The Model DS is ideally suited for installation in mixing, blending, white water tanks and wastewater treatment locations. |  PMC Smart transmitters
Smart Stainless Steel pressure, level and vacuum transmitters feature our PMC flush-mounting design which accurately measures pressure of heavy slurries, liquids and gases. |  NOSHOK Series 21 Sanitary Homogenizer Pressure Transmitter
The NOSHOK Series 21 Homogenizer Pressure Transmitter is a high accuracy, heavy duty pressure transmitter designed for the demanding requirements found in high pressure sanitary homogenizer applications. Using proven sputtered thin film sensor technology these transducers are stable, highly accurate, shock resistant and extremely durable. |  NOSHOK Heavy Duty Sanitary Pressure Gauges
The NOSHOK Series 10 Heavy Duty Sanitary Pressure Gauges are engineered and designed to meet or exceed the demanding requirements of the food & beverage, dairy and pharmaceutical industry. |
 New! Pressure/Level Transmitters
Process Measurement & Controls, Inc. (PMC) is pleased to announce a NEW range of Pressure/Level Transmitters with remote local display – Series PT/EL. | YAMATAKE - range of fieldbus devices
Yamatake has released a series of Fieldbus devices that comply with the latest FOUNDATION TM
Fieldbus specifications.
The series includes pressure/differential pressure transmitters, an electromagnetic flowmeter
and a smart valve positioner.
|
 Yamatake ATT60/70 Temperature Transmitters
TEMPERATURE TRANSMITTER PRODUCTS |  THOMMEN Digital Handheld Pressure Gauge - HM 35
The most impressive feature of the HM 35 / HM 35 EX manometer is the versatile range of applications. It allows measurements in the area of relative, differential or absolute pressure. |
 FCI Flow & Liquid Level Interface Switch
FCI Flow and Liquid Level Interface Switch Receives SIL-2 Compliance Rating from TUV NORD |  NOSHOK 800 Series Indicating Pressure Switch / Pressure Transmitter
The NOSHOK 800 Series Indicating pressure Switch / Pressure Transmitter provides continuous pressure monitoring and allows programming of the set points without pressurising. |
 AT9000 Advanced Transmitter - Model GTX
YAMATAKE RELEASES A NEW RANGE OF TRANSMITTERS |
| |
|
Beamex - High quality calibration equipment
Beamex develops, manufactures, and markets high-precision, high-quality calibration equipment and systems to provide solutions to meet the demands of compliant agencies like FDA, ISO, OSHA, etc. | Software for Fibre Optics Manufacturers from IRCON!
By combining advanced thermal imaging technology with application-specific software, Ircon has created the Preform Inspection System. The Ircon Preform Inspection System is the first thermal imaging system designed specifically for the manufacturers of fibre optics filaments. |
| |
|
 BELLOFRAM Type P627 Regulator
Marsh Bellofram's P627 Regulator is designed for both high and low pressure applications in the oil and gas industries. |  LONDON Large Display Indicators
If you need people to see important information from a distance, these LONDON large digital displays are ideal. | Ronan Continuous Weight Scale Measurement
The Ronan Continuous Weighing System consists of a measuring frame, source holder, detector, cable, and electronic unit. The measuring frame is available in “A” and “O” frame configurations depending upon the physical characteristics of the conveyor. | RONAN Density/Mass Flow Measurement
The Ronan X96 Density/Mass Flow Measurement System is ideally suited for continuous density measurement of liquids, slurries, and solids contained in a pipe or vessel without making contact with the process material. Since all system components are not wetted to the process such conditions as extreme temperature, high pressure, sterile, corrosive, toxic, or abrasive materials within the pipe do not affect the continuous on-line density measurement. |
FCI Flow/Level/Temperature Switch
FCI Flow/Level/Temperature Switch For
Cooling and Lubricant Monitoring
Ideal in Metal or Material Processing, Forming, Finishing, Cutting, Welding
| FCI’s New Large Line Size Coriolis Flow Meter
Ideal for Custody Transfer, Production Line Batching, Test Stand Measurement
|
FCI ST Series Mass Flow Meters
FCI ST Series Mass Flow Meters Combine Precision Accuracy and Economy |  Ronan Mold Level Processor
The new RONAN X96 ML mold level system gives you an unmatched update time of 10 ms, and fast "Cast Start" capability. |
YAMATAKE Temperature Indicating Controller
The Yamatake KF Series instruments are field installed type of temperature indicating controllers which are used to measure and control various types of process variables such as temperature, pressure, flow and liquid level. |  Ronan Series X16PDM Programmable Digital Monitors
The Ronan Series X16PDM Programmable Digital Monitors are the latest generation of Ronan’s state-of-the-art digital input man machine interface and remote annunciators offered in most common mechanical configurations. |
 RONAN X19 Series Single Point Annunciator
The RONAN X19 Series Single Point Annunciators self-contained alarms provide complete annunciation capability for NEMA 4 or 12 Applications. |  Fluxus ADM 7X07 Ultrasonic Flowmeters
The FLEXIM FLUXUS® ADM 7X07 series are ultrasonic flowmeters for permanent installation. The FLEXIM FLUXUS® ADM 7407 is designed for wall mounting and the FLEXIM FLUXUS® ADM 7907 is for installation in 19“ rack systems. |
 The Multitalented Fluxus ADM 7X07 Ultrasonic Flowmeters
The FLEXIM FLUXUS® ADM 7X07 series are ultrasonic flowmeters for permanent installation. The FLEXIM FLUXUS® ADM 7407 is designed for wall mounting and the FLEXIM FLUXUS® ADM 7907 is for installation in 19“ rack systems. |  Ultrasonic Flowmeters - FLUXUS® ADM 5107 & ADM 5207
The FLUXUS® ADM 5107 and ADM 5207 are inexpensive ultrasonic flowmeters for permanent installation specially adapted to the needs of water and waste water industry. |
FLEXIM Transducers for Non Intrusive Flow Measurement
Clamp-on flow transducers are mounted onto the pipe instead of inserted into it. |  FLEXIM Portable Ultrasonic Flowmeter - FLUXUS® ADM6725
The FLUXUS® ADM6725 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, the FLUXUS® ADM 6725 is ideal for service work. |
 Non-Invasive Flow Measurement - FLUXUS@ ADM Series
Flexim's (Germany) FLUXUS@ ADM series, represented in Australia by AMS Instrumentation and Calibration, is one of the most flexible solutions for flow measurement available on the market. |  Ultrasonic Flow Measurement At High Temperatures - Wavelnjector
The flow measurement of thermo oils, fuels, feed water, condensate, molten salt, bitumen, quench oil and many other media with very high temperatures places increased demands on the measuring instruments. |
 HNL Pressure Switches
The Series 300 Pressure Switches offer accurate, reliable switching in a robust cast enclosure. Featuring: | Beamex's Validation Services for Pharmaceutical Companies
Beamex's Validation Services provide support for pharmaceutical companies in the implementation of CMX calibration management software. A Beamex Validation Specialist performs the validation and the customer witnesses the results of the tests. Both people have to sign and date each result. |
FLEXIM Ultrasonic Flow Meters for the Production of Artificial Snow
Mammoth Mountain is one of the most popular ski resorts in the USA. The history of this eastern Sierra Nevada town dates back to 1857 when a few German gold diggers discovered the precious metal around the headwaters of the Owen Valley River. | VeriCal™ In-Situ Calibration System for GF90 Flow Meter
Eliminates De-Install/Re-Install--Saving Time and Money |
Beamex Integration Services
The compatibility of systems is one of the most important issues today for almost any company. This concerns calibration management software as well: seamless integration into a maintenance management system is a must. |  Flexim Ultrasonic Flowmeters
Ductile iron won't stop FLEXIM ULTRASONIC FLOWMETERS |
Flexim GL Type Transducers
New gas transducers extend the area of application | Electromagnetic Flowmeter Detectors for Water Industry Markets - WaterMAG Series
Yamatake Launches Low-cost Large-sized Electromagnetic Flowmeter Detectors for the Water Industry Markets |
 Download free calibration software demo
Download a FREE Beamex® CMX Calibration Software demo!
Register to download a free calibration software demo, user guide and white papers. |  RONAN Continuous Weight Scale Measurement
The X96 Continuous Weight Scale Measurement System is ideally suited for weighing materials on belt conveyors, screw conveyors, drag chain conveyors, and metal plate conveyors. Measurements of the processes are made without making contact with the process material. |
 Beamex® Integrated Calibration Solution
Beamex releases a Multimedia CD-ROM that introduces their automated calibration solution step-by-step |  Interface Model T22 Pulley Torque Transducer
Interface is pleased to announce the new Model T22 Pulley Torque Transducer. |
