Premium StorefrontHave a Storefront like this

Earthco Projects | Road Stabilizing or Subgrade Strengthening PolyCom


Road Stabilizing or Subgrade Strengthening PolyCom

PolyCom Stabilising Aid is Easy to use and providing significant water savings as well as enabling road crews to re use existing material without expensive re sheet material being imported.

PolyCom Stabilizing Aid is Environment friendly and OHS compliant.

Utilise existing machinery without paying huge establishment costs for extra equipment and personnel.
During maintenance and planning of a road one of the Main Considerations is the in-situ conditions and proximity of suitable materials.

The most common problem in the selection of a suitable material for road construction is its corresponding clay content, as a material with even a small amount of an active clay mineral can cause this material to be unsuitable or have insufficient strength for its intended use.

In cases such as these, suitable materials must be sourced from a borrow pit as close to the intended site as possible. These materials, and even more so their transportation, can be expensive.

With PolyCom Stabilising Aid it is possible to treat these substandard or marginal materials simply and economically. PolyCom interacts with the clay particles within these soils, alters the clay-water relationship and renders these previously unsuitable materials suitable.

As PolyCom is treating the clay within the soil at a particle level, a very small quantity per m² is required. With PolyCom you are able to make use of the in-situ materials and the costly exercise of transporting borrow pit materials is largely eliminated.

As the cost of PolyCom is far lower (typically less than half), it allows many more kilometers of road to be managed with the same budget or, alternatively, as far less is spent on the layer works of the road to be built with the same budget, more money can be utilized for a seal or accompanying works (drainage mechanisms, curbs, etc).
© Earthco Projects 2011

Show Promotional Message

Polymer pavement stabilisation

Stabilising pavements with PolyCom Stabilising Aid delivers comparable results to traditional stabilising methods with regard to strength but also imparts a high degree of water resistance and all important flexibility. It is significantly more cost effective, there are no cure-time constraints and the pavement is re-workable at anytime. All ground improvement work with PolyCom Stabilising Aid can be achieved using standard construction plant or stabilising machines.

Sub-grade improvement and capping:
PolyCom Stabilising Aid introduces water resistance, improved workability and increased strength, delivering a stronger more resilient and environmentally sustainable platform for your project. Strengthened sub-grades deliver huge cost advantages by allowing more economic pavement designs and drainage options. Sub-grade capping substantially reduces, and can even eliminate, re-work from weather or traffic damage in cut to fill operations, again reducing project costs.

Wear course up-grade:

Wear courses on council roads, rural tracks and access roads all benefit from improvement with PolyCom. PolyCom can be incorporated into the pavement during a standard service where remixing and re-shaping is performed.
A PolyCom improved pavement will deliver extended service interval requirements with increased strength, a highly resilient surface and water resistance.

Dust and sediment control:
Tighter and more durable water resistant road surfaces produce much less fugitive dust and sediment run off to water ways. These improved surfaces are critical for the environment and are fast becoming the minimum requirement for all road builders involved in construction, energy, mining and local government. Road surfaces like this, created with PolyCom Stabilising Aid have a significantly reduced ecological impact, are not difficult to produce and are easily maintained with correct procedures.
 
 
 
 
Partner Companies
ROYLANCE'S
Products & Services
This pack will treat 100 ton of material and is the equivalent of 2 ton of cement PolyCom Stabilising Aid
PolyCom Stabilising Aid is used for unsealed road construction and maintenance including road shoulders, mine sites and haul roads, civil roadwork and subdivision construction, ...
 
PolyCom Stabilising Aid PolyCom Stabilising Aid
PolyCom is used Australia Wide & Beyond by Earthmoving Contractors, Shires & Councils or by any group seeking to Save Time, Water & Money on Large or Small Civil Projects ...
 
PolyCom Stabilising Aid provides versatility in civil works
Roadworks and civil earthworks made easier with PolyCom Stabilising Aid.
 
Australian Made DustChek Works DustChek is an Australian Made Product to help manage costly haul road maintenance and improve working conditions for miners.
DustChek Dust Control Environment Friendly OHS Compliant, Simple to use dust suppression. DustChek is suitable for mining, container yards,access roads,Vineyards, ...
 
Pug-Mill for Hire
High quality modern state of the art pug-mill with or without support machinery available for hire or contract work in all areas.
 
 
 
Find out more:   View website for Earthco Projects Visit Website | Contact Details | Send Request
http://www.earthcoprojects.com.au

| Road Stabilizing or Subgrade Strengthening PolyCom

Find out more
View Video Demonstrations
PolyCom Stabilising Aid general Information
 
PolyCom Stabilising Aid provides versatility in civil works
Road construction in remote areas easier with PolyCom
PolyCom Stabilising Aid: Road maintenance advantages
PolyCom Stabilising Aid & PolyCom Girl
Betta Roads exhibit PolyCom at Pilbara Mining and Resource Expo
PolyCom Exhibiting at ECO-Buy 2011
News Articles