| |
|
 Aeronautical Low Pressure Calibrator - DPI 610 Aero Version
For aircraft leak testing of Pitot Static systems the DPI 610 Aero Version is a low cost yet flexible test instrument. |  Aeronautical Pressure Controller & Calibrator - DPI 515
The DPI 515 precision pressure controller/calibrator, when supplied with this option, enables direct calibration of aeronautical gauges/instruments for altitude or airspeed. | | |
|
 CEM68- Cont. Emissions Monitoring Flowmeter
The GE Panametrics CEM68 is a transit-time flowmeter for stacks and is designed to meet the requirements of the 1990 Clean Air Acts Amendments |  LEM Laboratory Environment Monitor
The Laboratory Environment Monitor (LEM)provides the ability to measure barometric pressure, ambient temperature,relative humidity and air density. | | |
|
 XMT868-Flow Transmitter
The XMT868 combines state of the art flow measurement capability with a low-cost transmitter package that measures only 53 x 42.6 cm , weighs only 4.50 kg, and can be installed right at the process measurement point. The all-digital XMT868 has no moving parts, never needs regular maintenance, and provides long-term, drift-free operation. |  AquaTrans™ AT868- A Flow Transmitter
The AquaTrans AT868 Ultrasonic Flow Transmitter combines state of the art flow measurement capability with a rugged, low-cost transmitter package that can be installed right at the process measurement point. It is designed specifically for municipal applications such as water, wastewater and sewage. | | |
|
 XMTC Thermal Conductivity Gas Analyzer
GE Panametrics’ XMTC Thermal Conductivity Gas Analyzer is a microprocessor-based transmitter that provides sensitive, accurate, on-line gas-composition analysis based on the thermal conductivity of gases in a mixture.
The XMTC uses thermal conductivity to distinguish one gas or group of gases from
| | |
|
 The DigitalFlow™ GF868 Flare Gas Flowmeter
The DigitalFlow Series is a new line of ultrasonic flowmeters based on the company's award-winning TransPort® portable flowmeters. Using Digital Signal Processing circuitry and GE Panametrics' patented Correlation Transit-Time™ technique, the new DigitalFlow Series flowmeters are accurate, reliable and drift free in a wide variety of conditions |  DigitalFlow™ GC868-Transit-Time U/S Flowmeter
The GC868 is a fixed-installation flowmeter comprised of the GC868 electronics, a pair of GE Panametrics' advanced clamp-on ultrasonic transducers, a clamping fixture, a preamplifer located near the transducers, and coaxial cables to connect the transducers to the preamplifier and GC868 electronics. |  DigitalFlow Gas Ultrasonic Flowmeter
GE Panametrics introduces the DigitalFlow Series, a new line of ultrasonic flowmeters based on the company's award-winning TransPort® portable flowmeters. Using Digital Signal Processing circuitry and GE Panametrics' patented Correlation Transit-Time™ technique, the new DigitalFlow Series flowmeters are accurate, reliable and drift-free in a wide variety of conditions.
|  DigitalFlow™ GN868 Natural-Gas Ultrasonic Flowmeter
Using Digital Signal Processing circuitry and GE Panametrics' patented Correlation Transit-Time™ technique, the new GN868 natural-gas flowmeter is accurate, reliable and drift free. Single- or dual-channel versions are available. |
| |
|
 Moisture Monitor™ Series 35-Single-Channel Hygrometer
The new Moisture Monitor Series 35 (MMS 35) combines GE Panametrics' technologically advanced M Series Moisture Probe with state of the art electronics |  Optica series chilled mirror hygrometers
The Optica series chilled mirror hygrometers offer NIST traceable humidity, temperature and pressure measurements for the connected generation. Now humididity reference data is acessible from anywhere, anytime from within a browser over the internet or your intranet. | | |
|
 TransPort Portable Ultrasonic Flowmeters
The PT878 is the smallest and lightest transit-time flowmeter available, yet big features are packed into its compact size. Its built-in datalogger is capable of storing more than 100,000 data points and up to 32 sets of site location parameters. |  DF868-Fixed-Install. Ultrasonic Liquid Flowmeter
The DF868 Ultrasonic Liquid Flowmeter is a fixed-installation meter based on the company’s TransPort® PT868 Portable Ultrasonic Liquid Flowmeter. The DF868 is available with two built-in measuring modes.
|  UltraPure Flow™ Measurement System
The UPT868 provides nonintrusive flow measurement of all liquids including deionized (DI) water, dilute chemical solutions, beverage slurries, and CMP (chemical/mechanical polishing) slurries |  Liquid Trap - 7000-102
The 7000-102 Liquid Trap can be used with any pneumatic test or calibration system, for pressures to 3000 psi, where liquid contamination may be present in the device under test. |
| |
|
 APX-Advanced Paramagnetic Oxygen Analyzer
The APX is the most accurate paramagnetic oxygen analyzer available on the market today. It can be calibrated with common nitrogen, or with a wide variety of other background gases.
|  TMO2-Thermoparamagnetic Oxygen Transmitter
The TMO2 is a compact, rugged, on-line transmitter that provides drift-free O2 measurement. It provides a superior level of performance and ease of use at a low cost. |  FGA311- Thermoparamagnetic Transmitter
The FGA311 is a low-cost, in situ, flue-gas oxgyen transmitter. Its compact transmitter design incorporates the electronics and oxygen probe into one weatherproof or explosionproof package. |  CGA351-Zirconia Oxygen Analyzer
The Series 351 Zirconia Oxygen Analyzer is suitable for monitoring and controlling any variable gas stream or atmosphere that is clean and dry. |
 O2X1-Two-Wire Oxygen Analyzer
The O2X1 is a small, two-wire, loop-powered oxygen transmitter with an advanced galvanic fuel-cell sensor and linear output. It is certified as intrinsically safe and weatherproof to NEC and CENELEC codes.
Besides the standard stainless steel version, the O2X1 is also available in two other packages.
|
| |
|
 Depth-Level Pressure Transmitter - PTX 1835 & 1235 Series
The PTX 1835 and 1235 submersible depth/level pressure transmitters are specifically designed for depth/level measurements in groundwater, well water, canals, rivers and other similar applications where the possibility exists for lightning damage. |  Depth-Level Pressure Transmitter - PTX 1885 & 1285 Series
Depth/Level Pressure Transmitter with Internal Lightning Protection |  Industrial Pressure Transmitter - PMP 1240
The PMP 1240 industrial pressure transmitter has been designed for use with aggressive pressure media found in many industrial and process applications. |  Pressure Transmitters - PTX 7900 Series
The PTX 7900 series combines modular design with the latest advances in ASIC technology and surface mounted electronics. This provides a lightweight and cost effective alternative to pressure gauges and switches in process industry applications. |
 4-20mA HART® Pressure Transmitters - RTX 1000A
The RTX 1000A (Analogue) pressure transmitters offer a cost effective solution to gauge and absolute pressure measurement with outstanding performance and conventional 4-20mA output with 10:1 turndown. |  4-20mA HART® Pressure Transmitters - RTX 1000H
The RTX 1000 Series provides a choice of user rangeable pressure transmitters with HART® digital signal superimposed (RTX 1000 H). |
 Industrial Pressure Transmitter - PTX 1240
The PTX 1240 industrial pressure transmitter has been designed for use with aggressive pressure media found in many industrial and process applications. |  Industrial Pressure Transmitter - PTX 510 & 510-IS
The PTX 510 combines micro machined silicon diaphragms with fully welded stainless steel and Hastelloy pressure ports to provide a highly accurate, stable pressure transmitter with the materials and environmental protection required for industrial applications. |
 Industrial Pressure Transmitter - PTX 7200
The PTX 7200 Series combines modular design with the latest advances in ASIC technology and surface mount electronics. |  Industrial Pressure Transmitter - PTX 1200
The PMP 1200 Series is a complete range of pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device. |
 Industrial Pressure Transmitters - PTX 7500 Series
The PTX 7500 series combines modular design with the latest advances in ASIC technology and surface mounted electronics. |  Submersible Depth-Level Pressure - Transmitters-Transducers - PTX-PDCR 1880
The 1880 Series submersible/depth pressure transducers are specifically designed for depth/level measurements in the groundwater, well water, canals, rivers and other similar applications. |
 Submersible Pressure Transmitter - PTX 1230
The 1230 Series submersible/depth pressure transducers are specifically designed for depth/level measurements in the groundwater, well water, canals, rivers, and other similar applications. |  Hammer Union Pressure Transmitter - PTX 661 Series
The PTX 661 Hammer Union Pressure Transmitter has been designed for use in extremely harsh environments in both on-shore Oil Drilling operations where high shock and vibration is likely to be encountered. |
 Low Differential Pressure Transmitters (Current) - LPX 5000 Series
This rugged design ensures high performance with long term reliability and stability. |  Low Differential Pressure Transmitters (Current) - LPX 8000 Series
Excellent thermal and long term stability characteristics make the LPX/LPM 8000 Series ideally suited to a wide range of high precision applications, from level measurement in pressurized tanks to filter clogging and many other measurements where fast response coupled with excellent overpressure capability are required. |
 Low Differential Pressure Transmitters (Current) - LPX 9000 Series
This rugged design ensures high performance with long term reliability and stability. |  Low Pressure Transmitters - LP 1000 Series
The LP 1000 series of low differential/gauge pressure sensors is specifically designed for use in cleanroom, HVAC control and similar applications where the accurate and reliable monitoring of very low pressures is required. |
 Multifunction Pressure Indicator - DPI145
High accuracy digital pressure indicator capable of accepting one to six pressure inputs at the sametime and displaying them all on one screen.High contrast white on blue LCD grraphics display provides a vivid and clear readout. |  MultiRange Pressure Transmitter - MR Series
The MultiRange Pressure Transmitter design incorporates a microprocessor and either a solid-state, silicon, piezoresistive sensor or a diaphragm based, capacitive cell. |
 Offshore-Process Pressure Transmitters - PTX 651 & PTX 671
Incorporating technology developed for aerospace/ military applications gives improved output noise, non-linearity and hysteresis, and long term stability. |  Pneumatic Pressure Controller - DPI 520
The DPI 520 pneumatic pressure controller provides a reliable, precise and economic solution for a wide variety of production, test and calibration applications. |
 Precision Pressure Indicator - DPI 150
It can be integrated into PC communications system via RS232(standard) or IEEE-488 (optional) and used to provide precise and stable pressure readings tp 0.001% FS over 18°C to 28°C with no temperature errors. |  Precision Pressure Transmitters - PTX 600 Series
For critical applications in industrial and research environments the PTX 600 series of two wire, 4-20mA output pressure transmitters improves upon the performance of previous models by offering new levels of stability, versatility and measurement accuracy from a standard production device. |
 Pressure Transmitters - PTX 7800
The PTX 7800 series combines modular design with the latest advances in ASIC technology and surface mounted electronics. |  Rack Mount Precision Pressure Indicator - DPI 605R
The DPI 605R is a rack mounting version of the popular DPI 605 precision portable pressure calibrator. |
 Smart-HART® Differential Pressure Transmitter - STX 2100 Series
The STX 2100 Series Differential Pressure Transmitter complements the STX 2000 Series, providing a complete family of Smart gauge, absolute and differential units. |  Subsea Pressure Transmitters - PTX 300 Series
The PTX 300 series of pressure transmitters has been developed for the offshore oil and gas industries as a compact, high performance device for reliable and long term subsea use. |
 Ultra Low Differential Pressure Transmitter - LPM-LPX 1000 Series
The LP 1000 Series wet/wet differential pressure transmitter is ideally suited for use in clean room HVAC monitoring and control. |  Verification Of Aircraft Pitot-Statics - ADTS 405F
GE Infrastructure Sensing is the foremost supplier of air data test systems, with over 25 years experience in the design and manufacture of advanced pressure measuring instruments and sensors. The ADTS 405 is the latest in a series of reliable, high accuracy, air data test systems. |
 Wellhead Pressure & Temperature Transmitters - PTX 400 Series
The PTX 400 series of pressure, temperature and combined pressure/temperature transmitters has been specifically designed for long term use in subsea locations. |  Wet/Wet Differential Pressure Transmitter - PTX 120-WL
The PTX 120/WL is a “wet/wet” differential pressure transmitter accepting a wide variety of pressure media on each port. |
 Ruska Differential Piston Gauge - Model 2482
The Model 2482 is a high precision standard that provides unsurpassed performance in the field of differential pressure metrology at high static line pressures. |  Series 3900 Pressure Control Pack
The Series 3900 Pressure Control Pack provides a convenient means of manually adjusting pressure to both the device under test and a calibration standard such as a gas piston gauge or digital pressure indicator. |
 Vacuum Gauges
In addition to the exisiting Model 2456 which provides for electronic monitoring of vacuum for piston gauges that operate in absolute mode, we also provide an analog vacuum gauge with a NIST traceable calibration. |
| |
|
 NPC-100 Pressure Sensor
NovaSensor´s NPC-100 pressure sensor is specifically designed for use in disposable medical applications. The device is compensated and calibrated per the Association for the Advancement of Medical Instrumentation (AAMI) guidelines for industry acceptability. |  NPC-1210 Low Pressure Sensor
The NPC-1210 low pressure series of solid state pressure sensors are designed to provide the same cost effective solution as NovaSensor®´s other NPC-1210 pressure ranges. |  NPC-1210 Medium Pressure Sensor
The NPC-1210 series of solid state pressure sensors are designed to provide a cost effective solution for applications that require calibrated performance over a wide temperature range. |  NPC-1220 Medium Pressure Sensor
The NPC-1220 series of solid state pressure sensors are designed to provide a cost effective solution for applications that require calibrated performance over a wide temperature range. |
 NPC-410 Medium Pressure Sensor
The NPC-410 series of solid state pressure sensors are designed to provide a cost effective solution for applications that require long-term stability and high volume. |  NPP-301 Series Surface Mount Pressure Sensor
The NPP Series features silicon pressure sensors in surface mount packages. An ultra-small Silicon Fusion Bonded (SFB), ultra-high stability SenStable® piezoresistive chip from GE NovaSensor® is placed in a plastic package that exploits high volume, leadframe package technology to bring forth a low-cost sensor alternative to the OEM user. |
 Automotive Pressure Sensor - PMP 317
The PMP 317 series has been designed to withstand the extreme temperature, vibration and shock levels of automotive test applications. |  Resonant Pressure Sensor - RPT350
The use of resonant structures in pressure transducers has long been recognized as producing highly stable sensors. |
 Sensor Termination Enclosure - STE 110
The STE 110 is a compact and rugged enclosure providing simple field termination for vented gauge pressure transducers and transmitters. |  Digital & Analog Output Sensor - PDCR 3500
The PDCR 3500 offers a unique capability of digitally enhanced, high accuracy output, coupled with high analog bandwidth. The transducer is a 1 inch diameter fluid isolated analog output device similar to the PMP 4000 Series. |
 High Performance Level Pressure Sensor - 1830-1840
The PDCR 1830/1840 transducer (mV output) and PTX 1830/1840 transmitter (4-20 mA output) are the latest generation of fully submersible high performance sensors for measurement of hydrostatic liquid levels. |  Industrial Pressure Sensors - PMP-PTX 1400
The PTX/PMP 1400 Series of Industrial Pressure sensors have been designed for use with aggressive pressure media found in many industrial and process applications. |
 Low Differential Pressure Sensor - LPM 5000 Series
This rugged design ensures high performance with long term reliability and stability. |  Low Differential Pressure Sensor - LPM 8000 Series
Excellent thermal and long term stability characteristics make the LPX/LPM 8000 Series ideally suited to a wide range of high precision applications, from level measurement in pressurized tanks to filter clogging and many other measurements where fast response coupled with excellent overpressure capability are required. |
 Low Differential Pressure Sensor - LPM 9000 Series
This rugged design ensures high performance with long term reliability and stability. |  NPH Series Low Pressure Sensor
An integrated circuit silicon sensor chip is housed in a standard TO-8 electrical package that is printed circuit board mountable. |
 NPH Series Medium Pressure Sensor
An integrated circuit silicon sensor chip is housed in a standard TO-8 electrical package that is printed circuit board mountable. |  NPI-12 Stainless Steel Media Isolated Sensor
The NPI-12 series of solid state, media isolated pressure sensors are designed to provide a cost effective solution for applications that detect tube blockages and pump performance. |
 NPI-15 Series Current Driven High Pressure, Media Isolated Pressure Sensor
The NovaSensor® NPI Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. |  NPI-19 Media Isolated Low Pressure Sensors
NPI media isolated sensors are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. |
 NPI-19 Series Current Driven Medium Pressure, Media Isolated Pressure Sensor
The NovaSensor® NPI Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. |  NPI-19VC Series Voltage Compensated, Medium Pressure, Media Isolated Pressure Sensor
The NovaSensor® voltage compensated NPI Series offers the performance of our current compensated sensors with the convenience of using a voltage supply. Voltage compensation allows the sensor to be connected directly to the power supply, thereby eliminating the need for additional components to construct a constant current source. |
 Submersible Level Pressure Sensors - 1730-1740 Series
The 1730/1740 series has been developed as a general purpose, hydrostatic liquid level sensor, designed to work in low powered, arduous applications, including surface water, ground water and tank level. |  Tire Pressure Sensor - NPX-1
The NPX-1 Tire Pressure Sensor represents the next generation in Tire pressure monitoring (TPMS). The compact sensor combines pressure and temperature sensing capabilities within a single processor based sensor. |
| |
|
 Moisture Image Series 1- Multichannel Analyser
The Moisture Image Series 1 (MIS 1) is the top-of-the-line model in GE Panametrics' family of Moisture Series Analyzers. This multifunction analyzer uses charts, graphs and windows to display any of six parameters |  Moisture Image Series 2-Single-Channel Analyzer
GE Panametrics' multifunctional Moisture Image Series 2 (MIS 2) measures moisture, oxygen, temperature, pressure and other parameters, and simultaneously displays up to six of these on a large, backlit LCD in various graphic formats. Real-time or logged data can be displayed or exported to a PC via an RS232 port, using either standard or custom software.
|  Moisture Monitor™ Series 3-Dual-Channel Analyzer
The Series 3 is a single- or dual-channel analyzer with a 2-line, alphanumeric LCD for moisture, oxygen, temperature and other parameters. |
| |
|
Computer Enhanced Response Software
GE Panametrics Computer Enhanced Response Software is a software feature that uses dynamic algorithms to predict the end point moisture concentration during abrupt dry down conditions. |  Instrument Data Manager™- Software for Ultrasonic Flowmeters
The Instrument Data Manager (IDM™) software is a nonresident communications program that is specially designed to interface with GE Panametrics flowmeters.
| | |
|
 DigitalFlow™ GS868 Ultrasonic Steam Flowmeter
The new DigitalFlowTM GS868 Ultrasonic Steam Flowmeter solves the problems of pressure drop and rangeability found in other flowmeters, reducing operation, installation and maintenance costs. |  DigitalFlow™ GS868 AND XGS868 Ultrasonic Steam Flowmeter
The new DigitalFlowTM GS868 & XGS868 Ultrasonic Steam Flowmeter solves the problems of pressure drop and rangeability found in other flowmeters, reducing operation, installation and maintenance costs. The GS868 is a full-featured flowmeter that measures mass flow rate of saturated and superheated steam over a very wide range of pipe sizes and flow conditions.
| | |
|
 Air Data Test Set - ADTS 505
The ADTS 505 is the latest in a series of reliable, compact and high accuracy Air Data Test Sets. |  Air Data Test Set - ADTS 530
The ADTS 530 is a compact and portable Air Data Test Set ideal for flightline use. This rugged solid state instrument features vibrating element transducer technology, providing high performance with a 12 month recalibration interval. |  Air Data Test Set Remote Hand Terminal - ADTS 505 Option A
The ADTS 505 option (A) Remote Hand Terminal significantly enhances operation of the Druck ADTS 505 Air Data Test Set. Specifically designed for use with civil aircraft, it utilises the same front panel display and keypad interface. |  Pressure Test System - Analog Test Kit - TPI1-AK/HTP1-AK A
1000 bar, 15 000 psi Hydraulic Pressure (compatible with most fluid media) HTP1-700 and HTP1-1000 are lightweight, easy to use and can generate pressures up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi. HTP1 is well suited for calibrating pressure transmitters, pressure transducers, pressure switches and pressure gauges. |
| |
|
 350 Ohm Bridge Pressure Transducer - PDCR 2200 Series
The PDCR 2200 Series has been developed to give a modern state of the art replacement for the metal foil, 350 ohm bridge transducers. |  Industrial Amplified Pressure Transducer - PMP 1200
The PMP 1200 Series is a complete range of pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device. |  Aerospace Pressure Transducer - PDCR 330 Series
The PDCR 330 pressure transducer is the culmination of over 10 years of development by Druck engineers. |  Amplified Isolated Output Transducers - PDCR 130 Series
The PDCR 130 series is a complete range of high level output pressure transducers, featuring the very latest in silicon strain gauge diaphragm, electronic thermal compensation and linearization technology. This is ideal for flight test applications. |
 Amplified Output Pressure Transducers - PMP 4000
The Druck PMP 4000 Series, a range of high performance amplified output pressure transducers, is a continuation of a successful family of products started in the early 1970's. |  Automotive Pressure Transducers - PDCR-PMP 4300 Series
The PDCR/PMP 4300 is the latest in the range of products that for many years has been "fine tuned" in design to suit all chassis and engine pressure measurement requirements. |
 Barometric Pressure Transducers - RPT 410
The RPT 410 Resonant Silicon Pressure Transducer (RPT) utilizes Druck's resonant silicon technology that has been field proven in many applications in air data flight and test, precision portable and bench calibrators, and high performance wind tunnels. |  General Purpose Pressure Transducer - PDCR 800 Series
Every PDCR 800 transducer is based on a high performance pressure sensor (core) which has subsequently been completed for a specific application by the addition of an electron beam welded pressure connector and an electrical connector assembly. |
 High Performance Millivolt Output Transducers - PDCR 4000
The Druck PDCR 4000 Series, a range of high performance millivolt output pressure transducers, is a continuation of a successful family of products started in the early 1970's. |  Industrial Pressure Transducers DIN Plug - PMP 1400
The PTX/PMP 1400 Series of Industrial Pressure sensors have been designed for use with aggressive pressure media found in many industrial and process applications. |
Submersible Depth-Level Pressure - Transmitters-Transducers - PTX-PDCR 1880
The 1880 Series submersible/depth pressure transducers are specifically designed for depth/level measurements in the groundwater, well water, canals, rivers and other similar applications. |  Terminal Enclosure - SCU 220
The SCU 220 is a compact and rugged enclosure providing signal conditioning of bridge-level strain gauge sensors. The loop-powered amplifier/transmitter converts the strain gauge signal into a 4-20mA standard signal. |
 Amplified Output Aerospace Pressure Transducer - PTX-PMP 3000 Series
The PTX/PMP 3000 Series of high level output pressure transducers use proven technology within flight certified hardware. |  CANbus Digital Output Pressure Transducers - DPS 4000
The DPS 4000 Series is a state of the art range of digital output pressure transducers featuring a CANbus serial communications interface. |
 Differential Pressure Transducers - PDCR 2100 Series
The PDCR 2100 is a small, lightweight true wet/wet dual diaphragm differential pressure transducer with standard ranges from 0 to 5 psid through 0 to 900 psid. |  Low Cost OEM-Industrial Transducers - 1000 Series
This flexible product is aimed at OEM manufacturers who require a high quality, cost effective pressure sensor, designed to meet their own specific application requirements at an economical cost. |
 Miniature Pressure Transducers - PDCR 42, 81, 200
A range of high accuracy sensors complete with thermal compensation in a miniature package providing maximum performance with minimal size and weight. |  Resonant Pressure Transducer - RPT Series
The use of resonant structures in pressure transducers has long been recognized as producing highly stable sensors. |
 Wide Temperature Range Transducers - PDCR 9x2
This is a compact 19" rack mount unit for workshop use. It is ideal for integration with ATE systems, or simply for use as a convenient bench top tool. |  Combined Pressure & Vacuum Deadweight Testers - Model T3500
These versatile instruments provide calibrations from 1-30 inHg vacuum and 3-500 psi in one extremely accurate yet easy to use primary standard. |
| |
|
 OKS™ Clamp-On Buffer Transducer
The OKS Clamp-On Buffer Transducer overcomes the problems of traditional clamp-on methods at very high or very low temperatures. |  XDP Display Package
GE Panametrics XDP provides a microprocessor-based control platform for the XMTC Thermal Conductivity Transmitter specific to hydrogen analysis for hydrogen cooled generators.
|  Portable High Pressure Pneumatic Calibrators - DPI 320/325 Series
The DPI 320/325 Series of high pressure pneumatic calibrators are the latest additions to a comprehensive range of compact and rugged instruments. |  DPI 515 Precision Pressure Controller/Calibrator
Fast precision pressure control for calibration of pressure components and sensors, transmitters or instruments. |
 Rangeable/Smart HART Pressure Transmitters - RTX 1000 Series
Since 1972, Druck products have successfully applied technological innovation and application focus to a diverse and demanding world of pressure. |  DigitalFlow™ ISX878 Liquid Flowmeter
How much does it cost to run AC or DC power to instruments in hazardous locations? How much does an explosion proof instrument cost? How much does it cost you to shutdown your line to install a flow meter? How much does permanent pressure loss cost you in operation? |
 Model EHRH Relative Humidity Transmitter
The Model EHRH Relative Humidity Transmitter is a waterproof RH sensing element and package which is ideally suited for monitoring relative humidity in high RH/harsh environment applications or where washdowns are required. |  Self-Calibrating Flue Gas Oxygen Analyzer - OxyTrak™ 411
The OxyTrak™ 411 in-situ flue gas analyzer's oxygen sensor features a sealed internal-reference chamber. |
 Series 300 Microprocessor-Based Flue Gas Analyzer
The Series 300 microprocessor-based flue gas analyzer provides continuous and accurate monitoring of all types of combustion processes, from simple boilers to specialized heat-treatment furnaces. |  Relative Humidity Calibration System - HumiTrace
HumiTrace is the market-leading system for reliable and precise calibration of virtually any relativity humidity probe. |
 Dewpoint Transmitter Probe - DewPro MMY 30
The DewPro MMY 30 is a loop-powered dew point transmitter for analyzing moisture content in dessicant air dryers, pipeline natural gas and industrial gases. |  High Performance Level Pressure Sensor - 1830/1840 Series
The PDCR 1830/1840 transducer (mV output) and PTX 1830/1840 transmitter (4-20 mA output) are the latest generation of fully submersible high performance sensors for measurement of hydrostatic liquid levels. |
 Capacitive RH Sensor - G-Cap-U
The GE Industrial Systems' G-CAP&template; 2 Relative Humidity Sensor is a low-cost, polymer capacitive based sensor, factory calibrated to within 1 picofarad (pf), +/- 3% RH accuracy. |  Loop Calibrator - UPS III
The UPS III is a rugged and extremely compact Loop Calibrator. Measuring 3” x 5” and weighing just 9.7 ounces, it fits comfortably in a shirt pocket. |
 Pressure Indicator / Loop Calibrator - DPI 800 Series
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. |  DPI 104 Digital Test Gauge
The Druck DPI 104 is a microprocessor controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple to use package. |
 Pressure Indicator/Transmitter - Titan
The Titan Series of panel meters incorporates the use of a microprocessor and a solid-state, silicone piezoresistive sensor. |  MMY245 Moisture Analyzer
The MMY245 Moisture Analyzer is a convenient, portable instrument that can quickly spot check the performance of gas dryers for compressed air, breathing air, and pure gas supplies. |
 Differential Pressure Gauge - LP 1000 Series
We are excited to introduce a new line of high accuracy sensors specially designed for monitoring pharmaceutical cleanrooms. |  Low Pressure Digital Pressure Calibrator - Model 7250LP
The Model 7250LP Low Pressure Digital Pressure Calibrator, part of the versatile Series 7250 family, is specifically designed to meet the demanding performance requirements of calibrating low pressure sensors, transducers, mechanical gauges, portable calibrators and their plug-in modules. |
 7615 Hydraulic Pressure Controller
The Series 7615 provides a unique, high speed approach to high pressure calibration and testing. |  PC6 IDOS Pressure Calibrator
Combines the latest developments in pressure instrumentation with advanced sensor and component technology to offer a versatile calibration instrument. |
 Pressure Calculation Software - PressCal
PressCal is a menu driven software program for pressure calculation and certificate generation using a Deadweight Tester as the pressure source. |  Combined Pressure & Vacuum Deadweight Testers - Model P3000
These versatile instruments provide calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. |
 Hydraulic Deadweight Testers (Oil operated) - Model P3100
The P3100 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. |  Stainless Steel Feedthru Fittings
Feedthru fittings provide GE Kaye thermocouple access to pressure vessel penetrations found in steam, gas sterilizers, dry heat ovens and lyophilizers. |
 Thermal Validation System - Kaye Validator®
The Kaye Validator is a standalone thermal validation solution specifically designed to conform with FDA data protection guidelines (21 CFR Part 11) and meet international and European cGMP requirements for inspection of pharmaceutical, biotechnology and medical device (EN285, EN554) manufacturing. |  Valprobe™ Wireless Process Validation & Monitoring System
The ValProbe™ system's wireless probe design eliminates the need for hard-wired sensors simplifying access to hostile, remote or hard to reach environments. |
 Protimeter Handheld Moisture Meters
The Protimeter product line offers handheld moisture meters and hygrometers for professionals. |  PanaView Instrument Interface Software
PanaView Instrument Interface software allows access to many product features from your computer. |
 GE Panametricws Mg101 Hygrometer Calibration System
The GE Panametricws MG101 hygrometer calibration system is used to generate precise, repeatable levels of water vapor in a carrier gas stream. |  Moisture Monitor Series 35 IS (MMS 35 IS) Portable Hygrometer
The Moisture Monitor Series 35 IS (MMS 35 IS) portable hygrometer is certified intrinsically safe, is battery powered, and is housed in a damage-resistant case. |
 RH Sensor - EMD Series
General Eastern purchased Phys-Chem Scientific Corp. for their high quality resistive sensor. |  Chilled Mirror Dew Point Transmitters - Dew-10 Series
Transmitters Dew-10 Series - GE General Eastern Description The Dew-10 Series is a family of low cost, high performance chilled mirror dew point transmitters comprising pipe, duct, and wall mount models. |
 Humidity Generator & Calibration Chamber - Humilab
GE General Eastern’s Humilab is a NIST-traceable relative humidity generator and calibration chamber that is continuously monitored and controlled by a chilled mirror hygrometer and precision RTD. |  GC-1 Humidity Chamber & Calibration System
The large 4 cubic chamber offers NIST traceable calibration capabilities. The large volume chamber controlled by GE's chilled mirror technology offers RH instrumentation OEMs increased calibration volume capabilities and savings. |
 Moisture Analyzers - Moisture Image Series 1
The Moisture Image Series 1 (MIS 1) analyzer is the top-of-the-line model in GE Panametrics’ family of Moisture Series analyzers. |  Sentinel™ ultrasonic flowmeter
It's designed for high accuracy gas flow measurement and based on 25+ years of of Panametrics Ultrasonic flowmeter technology. |
 DigitalFlow™ ISX878 Liquid Flowmeter
The ISX878 may be your best solution for measuring fluids in hazardous locations.
|  HygroPro Moisture Transmitter
The HygroPro is a loop-powered, intrinsically safe moisture transmitter for measuring the moisture content in gases and non-aqueous liquids in pipeline... |
 Ingress Dirt Moisture Trap - IDT 600-2
The IDT 600 is an effective barrier for protecting Druck portable pressure calibrators against the ingress of dirt and moisture which may be present in the gaseous pressure media or pneumatic devices under test. |  Aircraft Leak Detection Kit - AGE 1401
Ultrasonic detection technology has existed for many years and has been used widely in industrial predictive maintenance applications. Ultrasonic technology has slowly been developed over the years but the Space Shuttle requirement to monitor the external fuel tank O-Rings advanced this technology significantly. |
 Dew Point Analyzer - MMY 2650
The MMY 2650 is a moisture analyzer designed to operate with the General Eastern DY 5 planar gold aluminum oxide dew point sensor. The unit offers an optional input that can be used for pressure compensation, an external temperature probe, or any other sensor this input can be configured to accept 0 to 5 VDC and 4 to 20mA. |  Digital Process Indicators - DPI 270/280 Series
The versatile DPI 270 (miniature) and DPI 280 (general) series of digital process indicators are “smart” instruments for use with a wide range of process sensors and signal inputs. |
 Pneumatic Pressure Controller & Regulator - DPI 530
The DPI 530 is an easy to use, fast response digital closed loop pressure controller. |  Towable Car - ADTS 405C
ADTS 405C A towable cart including the ADTS 405 and PV103. |
