| |
|
 Type 4 & 4X Deep-Hinged Window Kits
Deep-hinged window kits provide protection, visibility and easy access to equipment and components installed behind the viewing area. Window kits are conveniently sized to allow direct mounting in the usable door area of Hoffman NEMA and CONCEPT® wall-mount enclosures, as well as any Hoffman enclosure with a suitably sized mounting surface. |  Type 12 Hinged Window Kit
For use as a viewing window where access to components mounted behind the window is required. Window is .25-in. (6-mm) clear acrylic. Easily mounted by drilling the appropriate mounting holes. All mounting hardware is provided. Continuous gaskets on all openings maintains UL Type 12 integrity. | | |
|
 COMPACT® Aluminum Type 4X Enclosures
Designed as an instrument housing or junction box for electrical, electronic, or pneumatic components in indoor and outdoor applications. Aluminum is particularly durable and well-suited for use in areas where corrosion problems exist.
|  Aluminum Continuous Hinge CHAL Junction Boxes
Designed as an instrument housing or junction box for electrical, electronic, or pneumatic components. It is ideal for applications where a lightweight box is required.
| | |
|
 INTERSAFE® Data Interface Ports, Type 4/4X/12
Arc flash protection at the intersection of convenience and safety. | Type 4 & 4X Deep-Hinged Window Kits
Deep-hinged window kits provide protection, visibility and easy access to equipment and components installed behind the viewing area. Window kits are conveniently sized to allow direct mounting in the usable door area of Hoffman NEMA and CONCEPT® wall-mount enclosures, as well as any Hoffman enclosure with a suitably sized mounting surface. | Type 12 Hinged Window Kit
For use as a viewing window where access to components mounted behind the window is required. Window is .25-in. (6-mm) clear acrylic. Easily mounted by drilling the appropriate mounting holes. All mounting hardware is provided. Continuous gaskets on all openings maintains UL Type 12 integrity. |  Type 4/12 & 4/4X/12 External Data Pockets
Data pockets mount on the exterior of an enclosure to provide access to system documentation without opening the enclosure door. Gasketed, hinged front for easy access to contents. Well-suited for applications where prevention of arc flash exposure is a concern. Sloped top to shed liquids and prevent accumulation of extraneous material. |
 Large Folding Shelf
Supports instruments and test equipment used to install and maintain electrical components in an enclosure. Also ideally suited for supporting laptop computers, monitoring units and other equipment used with programmable controllers. The shelf can be installed on the inside or outside surface of larger Hoffman enclosures. Automatically locks in the horizontal position when raised. When not in use, the shelf folds to 1.6 in. (41 mm) from the mounting surface. |
| |
|
 60mm Busbar Systems
Busbar systems dramatically reduce wiring time required to distribute power throughout a panel and remain touch-safe by establishing an electrical connection and mechanically fastening in one step. | | |
|
 Cable Runway System
This cable runway system provides a convenient way to route cables through otherwise unused space while keeping them accessible for easy maintenance. A variety of straight and curved ladder rack sections accommodate virtually any room layout when used with the appropriate straight and angled splice kits. For extra stability, the system fastens to the floor, ceiling, or wall with available mounting hardware.
Hardware to manage the cable run completes the system.
|  Quick Tray Wire Mesh Tray
Quick Tray Wire Mesh Tray supports and routes cable. It is constructed from high-strength, plated steel wires designed to support a large volume of cables. Straight tray sections are easily formed at the job site to precisely fit installation requirements. Unique mesh design makes cable drop-in and drop-out easy.
|  Feed-Through NEMA Type 12 Wireway
APPLICATION
Designed to protect electrical wiring from dust, dirt, oil, and water. A complete selection of straight sections and fittings is available in four sizes:
2.50 in. x 2.50 in. (64mm x 64mm)
4.00 in. x 4.00 in. (102mm x 102mm)
6.00 in. x 6.00 in. (152mm x 152mm)
8.00 in. x 8.00 in. (203mm x 203mm)
|  NEMA Type 3R EconoTrough
APPLICATION
Designed to provide an economical solution for protecting wiring either outdoors against rain, sleet, and snow or indoors against dripping water.
FEATURES
• Drip-shield top covers sides, front, and back to protect from rain, snow, or sleet
• Removable cover fastened with plated steel screws along bottom edge
|
 Stainless Steel Cable Tray
APPLICATION
The stainless steel cable tray is designed to protect rated cabling from dust, water, and debris. Custom runs can be created by using standard catalog items. All straight sections and fittings are completely open from the top or on one side, so cabling can be laid along an entire cable tray run—no need to "pull through" required with this design. A complete selection of fittings and straight sections is available in five sizes:
|
| |
|
 COMLINE® OSP Cabinet Packages
Hoffman introduces its new COMLINE® OSP Cabinet Packages, designed to fit most applications right out of the box. The enclosure is made of lightweight aluminium and is ideal for outdoor mounting of 19-inch communication equipment. |  Net Series Communication & Server Cabinets
The Net Series cabinets economically house 19- or 23-in. equipment that supports LAN, WAN, phone and voice mail equipment and servers in an indoor environment. Multiple sizes, designed-in cabinet adaptability and selected accessories provide maximum application flexibility.
|  PROLINE® FLOTEK™ PC (Passive Cooling) Server Cabinet
These server cabinets provide maximum passive air flow. They are designed for use in data rooms with either random or hot aisle/cold aisle cabinet positioning. Because there is no fan, these cabinets require minimum maintenance. Cabinets are tested to thermally manage up to 2500 Watts.
|  PROLINE-CL Colocation Server Cabinet
PROLINE-CL Colocation cabinets are designed for secured data centers that store multiple customers’ computer equipment. One- and two-compartment cabinets are available as pre-configured packages; three- and four-compartment packages can be ordered through the ATO program. Or you can order the components and design the cabinet to fit your specific requirements. |
 2-Post Open-Frame Racks
The 2-Post Open-Frame Rack is a key element in a structured cabling system. With models sized to fit either 19-in. or 23-in. equipment, this floor mounted unit is particularly well-suited for networking and data transmission applications.
|  CABLETEK™ Vertical Cable Manager
CABLETEK™ vertical cable managers, available in single- and double-sided models, support and manage cables in network rack-mounted equipment. They mount on the sides of, or between, 2- and 4-post open-frame racks. Easy-to-remove front covers ensure convenient access for cable installation and maintenance. |
 CABLETEK™ Horizontal Cable Manager
Manage and route cable in all applications with EIA standard 19-in. rack spacing. Use with cabinets or 2- and 4-post open-frame racks. Advanced design accommodates CAT 5e, 6, and 6A cables.
|  ACCESSPLUS™ Double-Hinged Wall-Mount Cabinet
The ACCESSPLUS™ Type 1 Double-Hinged DataCom Wall-Mount Cabinet is perfect for applications where security and accessibility are required and floor space is at a premium. This versatile cabinet mounts to a wall or can be pole-mounted with optional pole-mounting kit. Designed to hold multiple pieces of voice/data equipment comfortably, it can be mounted to be left- or right-hinged and comes completely assembled and ready to mount. |
 PROTEK® DH Type 4 or 12 Double-Hinged Wall-Mount Cabinet
This double-hinged wall-mounted cabinet is ideal for protecting 19-in. network equipment from falling dirt, splashing water, dust, and other contaminants. This versatile cabinet mounts to a wall or can be pole mounted with optional pole mounting kit. Designed to hold multiple pieces of voice/data equipment comfortably, it can be mounted to be left or right hinged and comes completely assembled and ready to mount. Both solid door and safety glass window door models are plenum rated.
|  19 in. Swing-Out Rack
The 19 in. Swing-Out Rack offers a convenient solution for smaller networking equipment in areas where floor space is at a premium. Some of the networking equipment that is well-suited to this rack includes telephone and voice mail, routers, switches, punch-down panels, and patch panels. It facilitates component installation and future expansion without disturbing existing equipment or cabling. Shipped in three easy-to-assemble sections.
|
 Seismic Cabinets
Hoffman Seismic Cabinets are designed to protect at least 1000 lb (453.6 kg) of LAN and WAN networking equipment, phone and voice mail equipment, and servers through Zone 4 seismic activity. Performance rating is based on NEBS-Telcordia GR-63-CORE standard vibration test.
These cabinets easily adapt to many different applications using Hoffman rack accessories and fan kits. In addition, ENC2189S can be configured to hold either 19-inch or 23-inch equipment.
|  Tool-less Shelf
An easy-to-install tool-less vented 19 in. shelf. Mounts onto rack angles that have EIA-spaced square holes (.375 in.). |
 D-BOX™ Wall-Mount Cabinet
The D-BOX™ Wall-Mount Cabinet provides convenient mounting, storage and protection for network equipment, patch panels and connections. This versatile cabinet can meet many different network needs, including horizontal cable distribution, copper to fiber interface, cross connections and consolidation point. The hinged door provides convenient access and a combination of fixed and rotating rack angles accommodates varying equipment sizes.
|
| |
|
 CONCEPT® Disconnect Wall-Mounted Enclosures
Designed to house the following: Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens ITE, Schneider Square D®. |  Low-Profile Type 12 Disconnect Enclosures
Sized for use with new, smaller electrical components, these disconnect enclosures provide the combined capabilities and features of Hoffman’s A25 and A28 enclosure families. Their 60 in. (1524mm) maximum height allows the construction of systems with a clear line of sight above the enclosures. Both wall-mount and free-stand models are available. 30 in. (762mm) to 42 in. (1067mm) models are wall-mounted; 48 in. (1219mm) and 60 in. (1524mm) models are free standing.
|  Two-Door Type 12 Enclosures for Flange-Mounted Disconnects
Designed to house the following flange-mounted disconnect switches and circuit breakers: Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens ITE, Schneider Square D® |
| |
|
 CONCEPT® EMC Single-Door Wall-Mount Enclosures
Designed to house sensitive electronics and communications equipment in installations where electromagnetic compatibility and environmental protection are required. These enclosures contain stray electromagnetic and radio frequency interference produced by interior components and also protect internal equipment from external EMC. Enclosure will protect internal components against windblown dust and water.
|  Stainless Steel Continuous Hinge EMC Junction Boxes
EMC junction boxes provide protection for housing electrical components in highly corrosive environments where electromagnetic compatibility and environmental protection are required. These boxes isolate equipment from stray external electromagnetic interference (EMI) and contain EMI that is produced by interior components.
|  Stainless Steel Type 4X EMC Enclosures
Provides protection for housing electrical components in highly corrosive environments where electromagnetic compatibility and environmental protection are required. These enclosures are used in indoor and outdoor settings that frequently are wet or have constant exposure to water, other liquids, or contaminants.
These enclosures isolate equipment from stray electromagnetic interference (EMI) and contain EMI that is produced by interior components. |  QLINE® I Polycarbonate EMC Enclosures
Designed for use as insulated electrical junction boxes, terminal wiring boxes, instrument housings, electrical control boxes, or pushbutton housings in wet, dusty, or corrosive environments where electromagnetic compatibility and/or system security are required.
These enclosures isolate equipment from stray external electromagnetic interference (EMI) and contain EMI produced by interior components.
|
| |
|
 ZonEX™ ATEX-Certified Hazardous Location Enclosures
Enclosures are designed and certified to meet ATEX Directive 94/9/EC to safely house electrical and electronic devices in EEx e Zone 1- and Zone 2-rated hazardous locations. Suitable for use in applications requiring ATEX enclosure certification in industries including petroleum and chemical processing, waste water processing, pharmaceutical, and other hazardous locations throughout the world.
| | |
|
 Sloping Front 30.5mm & 22.5mm Pushbutton Enclosures
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches, and pilot lights where slanted control surfaces are desired. Sloping front pushbutton enclosures provide protection against dirt, dust, oil, and water.
|  30.5mm & 22.5mm Pushbutton Enclosures
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches, and pilot lights. Enclosures provide protection against dirt, dust, oil, and water.
|  Two-Door Floor-Mounted Type 12 Enclosures
Designed to protect electrical and electronic controls, components, and instruments in typical industrial environments. The UL Type 12 rating protects enclosed equipment from dust, dirt, oil, and dripping water. These enclosures are used in machine tool applications for housing motor starters, drives, contactors, and PLCs, as well as a wide variety of other electrical and electronic equipment found in the automotive, pulp and paper, wood products, textile, and similar industries.
|  INLINE® Landscape Instrumentation Enclosures
INLINE Landscape Instrumentation Enclosures are sized to house a variety of field bus components. They protect sensitive electrical or electronic components in installations where dirt, dust, oil, water, or other contaminants are present. Both solid- and window-door models are available. Optional DIN rail brackets and panels provide component mounting options. Streamlined styling, flush latches, and an attractive, durable finish complete the offering.
|
 CONCEPT® Wall-Mounted Enclosures
CONCEPT enclosures house and protect your sensitive electrical or electronic components from harsh, dirty environments. For use in installations where dirt, dust, oil, water, or other contaminants are present. Streamlined styling, flush latches, and an attractive, durable finish complement other electronic equipment.
| CONCEPT® Disconnect Wall-Mounted Enclosures
Designed to house the following: Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens ITE, Schneider Square D®. |
Low-Profile Type 12 Disconnect Enclosures
Sized for use with new, smaller electrical components, these disconnect enclosures provide the combined capabilities and features of Hoffman’s A25 and A28 enclosure families. Their 60 in. (1524mm) maximum height allows the construction of systems with a clear line of sight above the enclosures. Both wall-mount and free-stand models are available. 30 in. (762mm) to 42 in. (1067mm) models are wall-mounted; 48 in. (1219mm) and 60 in. (1524mm) models are free standing.
| Two-Door Type 12 Enclosures for Flange-Mounted Disconnects
Designed to house the following flange-mounted disconnect switches and circuit breakers: Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens ITE, Schneider Square D® |
| |
|
 PROLINE® Modular Enclosure System
The PROLINE® Modular Enclosure System is designed to protect electrical and electronic equipment in industrial, local area networking, and telecommunications applications. Each enclosure provides full protection from dirt, dust, moisture, oil and other contaminents. Standard versions of PROLINE also shield against electomagnetic and radio frequency interference (EMC) | | |
|
QLINE® I Polycarbonate EMC Enclosures
Designed for use as insulated electrical junction boxes, terminal wiring boxes, instrument housings, electrical control boxes, or pushbutton housings in wet, dusty, or corrosive environments where electromagnetic compatibility and/or system security are required.
These enclosures isolate equipment from stray external electromagnetic interference (EMI) and contain EMI produced by interior components.
| | |
|
 CONCEPT® Operator Interface Enclosure System
CONCEPT® Operator Interface Enclosures are appropriate for applications incorporating flat-screen OI devices, pushbuttons, lights, meters, gauges and other similar devices. Enclosures are designed to be pedestal or pendant-mounted. | Sloping Front 30.5mm & 22.5mm Pushbutton Enclosures
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches, and pilot lights where slanted control surfaces are desired. Sloping front pushbutton enclosures provide protection against dirt, dust, oil, and water.
| 30.5mm & 22.5mm Pushbutton Enclosures
Designed to hold 30.5mm or 22.5mm oiltight pushbuttons, switches, and pilot lights. Enclosures provide protection against dirt, dust, oil, and water.
|  CC3000 Operator Interface Enclosures
The aesthetically appealing CC3000 modular operator interface enclosures provide the ideal solution for applications that require an attractive appearance. Enclosures are designed to be used with flat screen OI devices, lights, meters, gauges, and other similar equipment.
|
 CC4000 Operator Interface Enclosure System
This attractive family of operator interface enclosures sets a new standard for visual appeal coupled with design flexibility and ease of use. It's available in two body styles, three configurations and eight sizes. The system's capability for pendant or pedestal mount, with or without provision for a keyboard, offers exceptional design flexibility. |  Desk Consoles
PROLINE Gold Series desk consoles are ergonomically designed for use in either a sitting or standing position. Single-access consoles have a front door and solid back. Dual-access consoles have front and rear doors. The top opens on all consoles.
|
| |
|
COMLINE® OSP Cabinet Packages
Hoffman introduces its new COMLINE® OSP Cabinet Packages, designed to fit most applications right out of the box. The enclosure is made of lightweight aluminium and is ideal for outdoor mounting of 19-inch communication equipment. |  OPAL Pad-Mount DSL Cabinet
These outside plant aluminum (OPAL) cabinets are designed to meet the demanding needs of the telecommunications industry. They are particularly suitable when bringing combined broadband voice, data, and video service to a neighborhood.
DEVELOPING THE IDEAL CONFIGURATION
These cabinets are built to your order.
|  FTTX Fiber Optic Cabinet Packages
Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with welded aluminum and coated with polyester powder paint, these enclosures provide long-lasting protection in extreme outdoor applications.
|
| |
|
 WATERSHED® Sloped Top Sanitary Washdown Enclosures
A sloped top isn't enough - no other enclosure offers the features and engineering for sanitary washdown effectiveness provided by Hoffman's innovative WATERSHED Enclosures. WATERSHED Enclosures introduce a series of vital features that direct washdown effluent away from your process and eliminate "birdbath" pooling while maximising sanitation and plant productivity. A design so unique, it's patented - so effective it meets the certification requirements of NSF International. |  Stainless Steel Two-Door Wall-Mounted Type 4X Enclosures
These two-door wall-monted enclosures provide industry-leading protection for components or complex mounting configurations in highly-corrosive environments. Three-point latching with the Hoffman POWERGLIDE padlocking handles and a foam-in-place gasket combine convenience with security. They are well suited for use in petrochemical plants, pulp and paper processing, water treatment facilities and food, pharmaceutical and packaging applications. | Stainless Steel Cable Tray
APPLICATION
The stainless steel cable tray is designed to protect rated cabling from dust, water, and debris. Custom runs can be created by using standard catalog items. All straight sections and fittings are completely open from the top or on one side, so cabling can be laid along an entire cable tray run—no need to "pull through" required with this design. A complete selection of fittings and straight sections is available in five sizes:
| ZonEX™ ATEX-Certified Hazardous Location Enclosures
Enclosures are designed and certified to meet ATEX Directive 94/9/EC to safely house electrical and electronic devices in EEx e Zone 1- and Zone 2-rated hazardous locations. Suitable for use in applications requiring ATEX enclosure certification in industries including petroleum and chemical processing, waste water processing, pharmaceutical, and other hazardous locations throughout the world.
|
Stainless Steel Continuous Hinge EMC Junction Boxes
EMC junction boxes provide protection for housing electrical components in highly corrosive environments where electromagnetic compatibility and environmental protection are required. These boxes isolate equipment from stray external electromagnetic interference (EMI) and contain EMI that is produced by interior components.
| Stainless Steel Type 4X EMC Enclosures
Provides protection for housing electrical components in highly corrosive environments where electromagnetic compatibility and environmental protection are required. These enclosures are used in indoor and outdoor settings that frequently are wet or have constant exposure to water, other liquids, or contaminants.
These enclosures isolate equipment from stray electromagnetic interference (EMI) and contain EMI that is produced by interior components. |
 PharmaPro™ Flush-Mount Pharmaceutical Enclosures
Stainless steel flush-mount Type 4X enclosures are ideal for wall-mounting in pharmaceutical manufacturing environments where dust, bacteria, and other undesirable materials might accumulate.
|
