| |
|
WIKA Australia has introduced Diaphragm Seals made of Duplex stainless steel. | New "wikaramic"(R) ceramic coated pressure instrument seal for abrasive media.
| For applications needing to fulfil the highest hygienic demands, the WIKA 981.51 diaphragm in-line seal is now available with pipe clamp process connections.
|
| |
|
The convenience of a self indicating pressure transmitter has been further enhanced with a switching function.
The WIKA PSD-10 has a standard 4...20mA transmitter with a digital display which can have one or two switching points to activate pumps or alarms as required. | IL-10 Submersible transmitter suitable for petrochemical applications. | The WIKA LH-10 transmitter suitable for liquid level measurement offers features normally found in transmitters twice its size.
|
| |
|
WIKA model 232.30 Stainless Steel pressure gauges feature a solid front baffle & blowout back, full safety pattern case.
The model 236.30 features Monel wetted parts. | WIKA Australia has introduced Diaphragm Seals made of Duplex stainless steel. | The WIKA 232.36 pressure gauge is especially designed for occasional short-duration overpressures of up to 4 times the scale range. The special scale indicates the actual over-range value. | New "wikaramic"(R) ceramic coated pressure instrument seal for abrasive media.
|
The Schneider Monoflange series has been designed to replace the typical instrument valve installation system with a compact, weight and cost effective instrument manifold. | Mensor's model DPG 2400 digital pressure gauge is an economical, single-range pressure measuring instrument, for panel mounting or desktop use. |
For use in clean rooms or in bulk gas supply systems, WIKA has developed a new design of gauge for ultra-high purity applications. The gauge, with nominal size 2", is available with electrical contacts (Reed-switch).
Due to its very compact size, mounting in extremely limited spaces is possible.
| The Mensor 2300 series of hand-held digital pressure measuring instruments are now available from WIKA Australia. |
Multifunctional pressure measuring instruments:
WIKA has expanded the INTELLiGauge range | More and more, vehicles are moving to natural gas. Accordingly, the automotive industry’s demands for CNG drive train components are growing. |
WIKA presents a new generation of measuring instruments for mandatory filter monitoring in the Heating Ventilation and Air Conditioning industry (HVAC)
There are three new products: the mechanical differential pressure gauge air2guideP
These new instruments were developed in response to a wide-ranging analysis of market and customer requirements.
|
| |
|
WIKA presents a new generation of measuring instruments for mandatory filter monitoring in the Heating Ventilation and Air Conditioning industry (HVAC)
There are three new products: the mechanical differential pressure gauge air2guideP
These new instruments were developed in response to a wide-ranging analysis of market and customer requirements.
| The convenience of a self indicating pressure transmitter has been further enhanced with a switching function.
The WIKA PSD-10 has a standard 4...20mA transmitter with a digital display which can have one or two switching points to activate pumps or alarms as required. | WIKA's Cella Pressure Switch Range | WIKA Australia complement their pressure products with the Ettore Cella range of pressure switches. |
Convert your existing pressure transmitter into an indicating switching transmitter |
| |
|
WIKA's new field housing pressure transmitter F-20 is designed for use in the Food, Water, Chemical, Pharmaceutical & process industries. | A versatile high accuracy pressure transmitter suitable for level, volume and pressure measurements incorporating a digital display. | Convert your existing pressure transmitter into an indicating switching transmitter | The IS-10/11 family of transmitters have been recently certified to the new ANZEx requirements. |
OEM Pressure Transmitter for mobile hydraulics applications up to 600 bar. | IL-10 Submersible transmitter suitable for petrochemical applications. |
The Schneider Monoflange series has been designed to replace the typical instrument valve installation system with a compact, weight and cost effective instrument manifold. | By launching the new MCT-1 pressure sensor module, based on its ceramic thick film technology and with a very attractive price/performance ratio,
WIKA has added a product to its range which is ideally suited to high-volume requirements. |
Wika's DP-10 offers a pressure transmitter which is suitable for filter system monitoring and control and pressure monitoring in clean-rooms and airlocks. | Only a few months after its launch, WIKA is offering the A-10 pressure transmitter with an even higher accuracy: The non-linearity is now guaranteed with 0.25 % or 0.5 % BFSL.
Each A-10 pressure transmitter is supplied with an accuracy test crtificate confirming that each transmitter is tested after manufacture and performs within the acceptable accuracy limits. |
Multifunctional pressure measuring instruments:
WIKA has expanded the INTELLiGauge range | More and more, vehicles are moving to natural gas. Accordingly, the automotive industry’s demands for CNG drive train components are growing. |
Designed for calibration labs, hospitals, aircraft instrument service labs etc; the WIKA CPG 2400 digital pressure gauge is an econonomical atmospheric pressure measuring instrument. | The New WIKA HP-2 high pressure transmitter breaks the 10,000 bar barrier. |
The new WIKA R-1 pressure transmitter has been optimally designed for the specific requirements of refrigeration and HVAC applications. The R-1 has proven condensation resistance and compatible with all current refrigerants. | The new WIKA BEN-10/11 precision pressure transmitter with 0.1% accuracy and all stainless steel construction is suitable for the most demanding pressure measuring applications requiring a standard 4...20mA signal compatible with most process control systems. Available with an optional digital display and special EHEDG Hygienic fitting suitable for process temperatures up to 150DegC. Various process connections are available making the BEN-10/11 compatible with most processes. |
With the A-10, the "Next Generation", WIKA offers a compact pressure transmitter which is not only reliable, but also remarkably inexpensive. So the A-10 can be used worldwide, the A-10 features international pressure connections, pressure units and approvals. An innovation from WIKA, ideal for general industrial applications. | New BEN-10/11 High accuracy Process Pressure Transmitter with 316 Stainless Steel housing and IP67. Pressure ranges available from 0.1bar to 1000bar make this pressure transmitter suited for most demanding process control and monitoring applications.
|
For use in clean rooms or in bulk gas supply systems, WIKA has developed a new design of gauge for ultra-high purity applications. The gauge, with nominal size 2", is available with electrical contacts (Reed-switch).
Due to its very compact size, mounting in extremely limited spaces is possible.
| The WIKA SA-11 pressure transmitter has been specially designed to meet the requirements of the food, beverage, pharmaceutical and biotechnology industries in accordance to 3A Sanitary Standards. |
WIKA has further extended its product range with the new IPT series of pressure transmitters directly tailored to the stringent requirements of the Process Industry.
Integrated LCD back lit display indicates all important parameters including the current pressure and allows for easy configuration and scaling.
| The convenience of a self indicating pressure transmitter has been further enhanced with a switching function.
The WIKA PSD-10 has a standard 4...20mA transmitter with a digital display which can have one or two switching points to activate pumps or alarms as required. |
The WIKA MHS-1 is the first pressure transmitter to offer features demanded in the new EC Machinery Directive (2006/42/EC) and the safety standards ISO 13849-1 (Performance Level -PL) and alternatively IEC 61508 (safety Integrity Level - SIL) which become affective at the end of 2009. | For applications needing to fulfil the highest hygienic demands, the WIKA 981.51 diaphragm in-line seal is now available with pipe clamp process connections.
|
WIKA presents a new generation of measuring instruments for mandatory filter monitoring in the Heating Ventilation and Air Conditioning industry (HVAC)
There are three new products: the mechanical differential pressure gauge air2guideP
These new instruments were developed in response to a wide-ranging analysis of market and customer requirements.
|
| |
|
WIKA presents a new generation of measuring instruments for mandatory filter monitoring in the Heating Ventilation and Air Conditioning industry (HVAC)
There are three new products: the mechanical differential pressure gauge air2guideP
These new instruments were developed in response to a wide-ranging analysis of market and customer requirements.
| With the new TR35 thermometer, WIKA can now also offer an electrical temperature measurement solution to OEM customers. | WIKA ST range of handheld portable infrared thermometers allow non-contact temperature measurement from a distance. They are therefore useful for temperature measurement where probe type sensors cannot be used, e.g. because of high heat, poor access or height restrictions. | With the DiwiTherm®-SOLAR family of instruments, digital temperature measurement is possible without any permanent local electrical connection.
|
WIKA have announced an enhanced analogue temperature transmitter product portfolio for industrial and HVAC applications.
| WIKA Australia supply the Tel-Tru line of rugged, accurate, and dependable bi-metal thermometers. Combined with our own products - as the industry leader, we offer more bimetal configurations and temperature ranges than any other supplier.
|
WIKA have a new electrical temperature measurement digest, packed with useful information on RTD's, Thermocouples, Thermocouple cables, transmitters and thermowells. | WIKA Australia have an extensive range of temperature sensor wire and cables.
WIKA has global supply arrangements with some of the worlds major temperature sensor wire and cable manufacturers and can arrange manufacture of temperature sensor wire and cable to meet customers special requirements.
|
New software version
for HART temperature transmitters | New HART® temperature transmitters, T32.XS:
Dual-sensor functionality and drift detection |
The new WIKA Twin-Temp combined bimetal / resistance thermometers offer two measurement systems in one instrument.
A bimetal thermometer displays the measured temperature locally, while the integral Pt100 resistance sensor allows remote measurement, with display or control of the measured variable. | The temperature transmitter T5350 from WIKA is certified according to Foundation Fieldbus Standard ITK4.51 and offers the functions LAS and PID, with which autarkic control functions can be realised in the field. For PROFIBUS PA the T5350 features the current profile 3 and is also certified. |
Due to their compact design, the WIKA resistance temperature sensors, models TR221 & TR223, are particularly suitable for applications where mounting space is limited. The simple robust design of these instruments contributes to reliable, economical plant operation. |
| |
|
WIKA has introduced a new generation of high accuracy instruments for the calibration of pressure and temperature equipment. | WIKA's NATA Certification labs No. 969, 1026 for Pressure & Vacuum and lab 410 for Heat & Temperature. | The WIKA The CTB9100 micro calibration baths, for thermometers, feature a wide temperature range, short reaction times and a broad scope of application, while also being very easy to use. This ease-of-use helps avoid input and set-up errors and increases the operational reliability of the baths. | WIKA ST range of handheld portable infrared thermometers allow non-contact temperature measurement from a distance. They are therefore useful for temperature measurement where probe type sensors cannot be used, e.g. because of high heat, poor access or height restrictions. |
| |
|
The new DH Budenberg DPG10A piston gauge is built around an original concept first introduced by Desgranges & Huot in the early 1980's and which combines the metrological performance of a pressure balance with the convenience of digital instrumentation. | The DH Budenberg Model 249T differential pressure deadweight tester is designed for calibrations at elevated static pressures up to 200bar (3,000 psi) | The DH Budenberg fig 80 deadweight tester provides accurate pressure measurement in pipelines and vessels. | The DH-Budenberg 580 series of dead-weight testers, available from WIKA Australia, are genuine primary standards, which guarantee fast and reliable pressure calibrations on a daily basis. |
Portable deadweight testers, ideal for pipeline testing. | WIKA offer Primary Standard pressure balances up to 100bar (pneumatic) or 4000bar (Hydraulic) with uncertainties of measurement down to 0.01% of reading. |
| |
|
WIKA's NATA Certification labs No. 969, 1026 for Pressure & Vacuum and lab 410 for Heat & Temperature. | WIKA has introduced a new generation of high accuracy instruments for the calibration of pressure and temperature equipment. | The DH-Budenberg 580 series of dead-weight testers, available from WIKA Australia, are genuine primary standards, which guarantee fast and reliable pressure calibrations on a daily basis. | The DH Budenberg fig 80 deadweight tester provides accurate pressure measurement in pipelines and vessels. |
With the WIKA CPH 6000 process calibrator, routine testing and calibration of pressure instruments and pressure switches is made far easier. | The model 8201 series of air data test sets (ADTS) from Mensor, provide exeptional performance in an easy to use package. |
The new DH Budenberg DPG10A piston gauge is built around an original concept first introduced by Desgranges & Huot in the early 1980's and which combines the metrological performance of a pressure balance with the convenience of digital instrumentation. | The Mensor 2300 series of hand-held digital pressure measuring instruments are now available from WIKA Australia. |
Mensor Corporation, a WIKA Company, has developed a range of pressure calibrators / controllers with interchangeable pressure sensor modules. | WIKA's Compact precision pressure measuring instrument CPG2500 with touchscreen and Ethernet interface |
WIKA showcases its high-pressure controller with supreme features at Interkama 2008.
Very high specifications of precision, reliability and control stability are satisfied with the new, patented CPC8000-H high pressure controller. | Launched at Interkama 2008, WIKA has introduced a precision pressure measuring instrument in a hand-held format for mobile applications: The new CPH6400 is ideally suited to assist in measurement, test and calibration in mobile service & commissioning applications.
|
The new CPC3000 High-speed pressure controller completes the WIKA pressure calibration portfolio | Designed for calibration labs, hospitals, aircraft instrument service labs etc; the WIKA CPG 2400 digital pressure gauge is an econonomical atmospheric pressure measuring instrument. |
