Specialised Force are the Authorised Australian Distributor for the Truflame lightweight hydraulic weld shear from the UK. These weld shears are widely used in railway construction and maintenance around the world.
This ultra lightweight hydraulic rail shear is designed for the removal of excess material after the procedure of Thermit rail welding of two rail sections. It leaves a sufficient amount of material for final grinding.
The modern design of this unit uses two x 15 tonne (30 tonne in total) high pressure spring return cylinders which operate at up to 700 bar (10,000 PSI).
The unit is supplied with a cutting blade set suitable for 53 & 60kg rail profile. Other rail cutting blade sets are available upon request, up to and including 68kg rail profile.
The unit consists of three major assemblies:
- Frame with Rail Clamps—Weight 28kg
- Hydraulic Cylinder Group with Blade set—Weight 35kg
- Choice of hand, electric, battery, air or petrol pump—Weight on application.
Note: The hydraulic cylinder group has a lifting handle fitted so the entire group can be removed or replaced with ease.
|
Part # |
Description |
Weight |
|
TCRSS&S |
Steel Weld Shear Without Pump Or Hose |
63kg* |
|
P42 |
Auto 2-Speed Hand Pump |
8.6kg |
|
DSP-120 |
240V Electric Pump |
8.0kg |
|
2050DA |
Battery Pump |
7.7kg |
|
Plus Hose & Coupler (Please Specify Length) | ||
APPROVED BY BRITISH RAIL
(CERTIFICATE No. PA05/3762)
Specialised Force
Visit Website
Contact Details
Send Request-
Hydraulic Shears | Wood shear HWSSend Request
-
Budget-Friendly Hydraulic Guillotines - TS SeriesSend Request
-
Scrap Metal Shear (AS-160)Send Request
-
Welding Helmet | Pureflo Powered Air Respirator HelmetSend Request
-
Compact MMA Welder | TP125-10 VRD (Voltage Reduction Device)Send Request
-
Insulation Piercing Connector | TTD Series | TTD151XFASend Request


