Commercial Lifts | Disabled Access | Southern Lifts - ML3000
Manufactured in: Australia by an Australian owned family company
Standard Compliant: AS1735 part 17
Application: Commercial or residential use
BCA E.3.6 Complicant:
Car size 100mm x 140mm, Braile & Tactile, Light
Curtain sensors and dual car controls
Internal or external
Crane in or dismantle
The lift complete with tower can be fitted to an ower supplied shaft or have sheeting attached directly to the tower. Cladding to be in compliance with the lift code.
Powered: Oil Hydraulic with direct acting cylinders on each side of the lift car
Travels: 2 to 3 levels with a maximum travel of 4 metres
Speed: Travel 3 metres in 30 seconds
Lifting Capacity: 350kg (2 people including 1 in a wheel chair)
Car Size: 1100mm wide x 1400mm deep & 2000mm high
Frame: Self supporting lift shaft fabricated from Aluminium
Pit Depth: 80mm
A standard ML3000 is fitted with a swing action Readicote door undercoated. Other options are available for doors subject to the weather (metal doors) or by owner's choice as long as the door complies with the lift code. (The manufacturer reserves the right to approve the type & style of door). Automatic door operators are available on request.
All doors are fitted with a concealed automatic door closer, full length pull handle and a glass vision panel (optional).
Fabricated from a welded aluminium the car is lined with white colourbond and trimmed with extruded aluminium moulding. Custom finishes such as timber, MDF, and stainless steel are also available.
Electrical push button controls
Key lockable to prevent unwanted users
Emergency stop button
Weatherproof statins are available for external landing stations
Stainless steel handrail
Non - slip floor covering indoor/outdoor carpet
Emergency Telephone Auto - dial
Two recessed down lights
Key lockable push button controls
Emergency stop button in the lift car
Photo electric sensors across the door entrance
Back up battery power for lighting & lowering of the car
Emergency lowering facility provided in the machine cabinet
A non-reversal timer of 5 seconds is fitted to allow the rider in the car to open the landing door once the car has stopped without the threat of the car being called by another operator.
Lockable painted metal cabinet 600mm wide x 300mm deep x 1800mm high
This cabinet is to be located at the lower landing adjacent to the lift shaft
The following is a list of the equipment housed in this cabinet:
- Electrical Main switch for the lift
- Power supply
- Cabinet light
- Pressure Pump
- Electrical control board
- Hydraulic control board
- Holding tank with level sight indicator
- Emergency Battery Back up with charger
- Emergency instructions & tools
We recommend that the lift be serviced at no greater intervals than 12 months. This will keep the lift in a safe and serviceable condition.
Warranty: 12 months on all parts and labour excluding misuse and/or malicious damage.
Work by others:
Cladding to shaft
Telephone cable to the lift shaft
240w power to be supplied to the Machine cabinet
Concrete pad for the lift