The Flat Drain Guard will filter 99.8% of oil/fuel run-off and most sediment and silt from entering the stormwater system and allow water to flow through.
The catchment zone has an overflow space located at the top to ensure that blockages will not occur even when the filter is full. Simply place underneath the drain grate, attach ties to the grate for added security and trim to size.
Standard size suitable for drains up to 1m x 1m.
Each Flat Drain Guard will let the water run through but has two replaceable Oil/Fuel Absorbent Pillows that can absorb up to 3.5 litres of hydrocarbon.
TSSFGD Flat Drain Guard: 1100x1100mm
(suit drain up to 1mx1m)