Australia's #1 industrial directory for equipment & suppliers

Earthmoving Equipment | Backhoe Loader SWB30-25F

Supplier: Lejburg Earthmoving Equipment

Earthmoving Equipment Backhoe Loader SWB30-25F is equipped with a reliable WD Duetz (Or Sinoway SW6120T) engine with 4 forward & 4 reverse synchromesh mechanical shift transmission.


Earthmoving Equipment | Backhoe Loader SWB30-25F

Standard with Combined seal cylinder obtains high seal performance and more reliability for improved loader and backhoe performance.Standard with Carraro wet type rear axle with multi-disc brake & Carraro front axle

New-type cab with more space, increases comfort and visibility.4 wheel drive and 2 wheel drive as an option.


  • Model Deutz T226B(Or Sinoway SW6120T)
  • Type Direct injection,turbocharged,Water cooled
  • Rated power 70kW
  • Rated speed 2200rpm
  • Rated fuel consumption 225g/Kw.h

Main Technical Specification


  • Rated load 1700kg
  • Operating weight 7000kg
  • Max.lifting capability >2500kg
  • Rated bucket capacity 1.0m3
  • Max.breakout force >40kN
  • Max.dump clearance 2611mm
  • Dump reach 726mm
  • Dump angle at any position = 43.5°
  • Min. turning radius
  • Outside of bucket 5670mm
  • Outside of rear wheel 4300mm
  • Lifting time of bucket = 5.1s
  • Lowering time of bucket = 4.9s
  • Dumping time = 0.9s
  • Digging
  • Rated bucket capacity 0.3m3
  • Max. digging depth 4338mm
  • Max. digging force >50±10%kN
  • Max. digging radius 5481mm
  • Max. dumping height 3737mm

Transmission System

  • Torque Converter
  • Model CARRARO
  • Torque ratio 2.55
  • Cooling type Pressure oil circulating

Gear box

  • Model CARRARO
  • Type Synchromesh mechanical shift
  • Gear shifts(Forward/Reverse) F4/R4
  • Travelling speed(km/h)
  • Forward/Reverse I 5.8/7.0
  • Forward/Reverse II 10.5/12.6
  • Forward/Reverse III 20.1/24.3
  • Forward/Reverse IV 40.2/48.6

Axle and Tyre

  • Model CARRARO(4×4)
  • Type of main reducer Spiral bevel gear, single stage
  • Type of final reducer Single stage planetary
  • Max. tractive force 70KN
  • Tyre size
    • Front tyre 12-16.5NHS
    • Rear tyre 19.5L-24R4

Working Equipment

  • Model of oil pump JHP2050AXCC
  • System pressure 21.1Mpa
  • Model of loading valve ZL20DC-02
  • Model of digging valve ZL30DC-07

Steering System

  • Type Front wheel steering
  • Model of steering pump JHP2050AXCC
  • Model of steering redirector BZZ5-E160B FKB-3022
  • System pressure 14Mpa


  • Length(with bucket on ground) 7077mm
  • Width 2313mm
  • Height(To the top of the cab) 2720mm
  • Height(To the top of the digging pole) 3424mm
  • Load Bucket width 2328mm
  • Wheelbase 2155.5mm
  • Tread(F/R) 1714/1557mm
  • Ground clearance 275mm

Service Capacities

  • Fuel tank 151L
  • Engine crank case 11L
  • Converter and gear box 21L
  • Hydraulic system 110L
  • Driving axles(F/R) 7.6/17L