- 700 bar
- Large digits
- Bias lighting
- Can be calibrated
It is difficult to grease a bearing with the right amount of grease by hand with an ordinary hand grease gun and almost impossible with an electrically driven barrel pump.
Most bearings are therefore given either too much or too little grease causing a shortening of bearing life and often results in costly breakdowns and stoppages.
Assalub´s grease meter can be mounted on a manual pump or a grease gun fed by an external device.
A simple push on a button will set the meter at zero and the metering can be started.The result is shown in large (9 mm / 11/32”) and clear digits.
The result can be expressed in cm³,g,oz or in fl oz. Regardless of which units are used, the meter can be calibrated to show a precise reading.
Thanks to Assalub´s grease meter it is possible to grease exactly according to the bearing manufacturers recommendations.This will increase the life of the bearing and reduce the number of stoppages.
By experience some 30% of grease will be saved when greasing with a grease meter.
Technical Data of Grease Meter
- Material, housing: Aluminium, anodised
- Sealings: NBR
- Working pressure: Max 700 bar (10,000 PSI)
- Flow: Max 1000 cm³/min
- Measuring accuracy: ±3% up to 300 bar,(4300 PSI)
- Digit height: 9 mm
- Number of digits: 4 digits
- Battery: 2 pcs LR1 (1,5 V)
- Medium: Grease up to NLGI2
- Weight: 0,3 kg
Connections ISO-R1/8, female Art No 0102390
Connections 1/8-27 NPTF, female Art No 0102390-2