In voltage-sensing wire feed units,there is no need for a special control cable between the power source and the wire feeder,so it is easy to move the equipment for field work on building sites and at shipyards etc.
ArcFeed 200 and 300 are the basic modles.The smaller one is suitable for 200mm wire spools and the larger for 300mm spools.
ArcFeed 300P is equipped with a specifically efficient wire feeding mechanism,so it is also suitable for the welding of thicker wires all the way up to 2.4mm self-shielded flux-cored wire.
ArcFeed 300RC corresponds to the 300 model,but is also equipped with a remote control unit that can be used with the Kemppi Master 5001 and Kemppi Pro sources.
More efficient use of your old MMA power sources
Because the arc-controlled wire feed unit does not require a control signal from the power source,the unit can be connected to many kinds and many brands of power sources,which do not require complex features.
Because of this,with a Kemppi ArcFeed wire feed unit,it is possible to upgrade your current MMA welding power sources to more versatile and productive MIG/MAG use.
For further information about the MIG/MAG Welding Wire Feed Unit - ArcFeed visit Kemppi Welding Machines at http://www.kemppi.com
Use the IndustrySearch e-mail feature below and one of the Kemppi Welding Machines team will respond to your enquiry directly.
The Joy Of Welding