This Total Hydrocarbon Analyser is unique for the following two reasons: First of all, the complete system mounts directly to the process wall or ductwork at the sample pickup point indoors and out. Secondly you can also have complete access and control from any location as the Model 650 FID Total Hydrocarbon Analyser is designed to make remote access easy with the built-i8n 4-20mA analog output can be connected directly to your PLC or to a simple display meter in the operator panel.
With the Model 650 FID Total Hydrocarbon Analyser the entire sensor assembly is fully heated up to 200 degrees celcius and the sample probe runs from the sensor directly into the process without exposure to ambient temperatures. The result? Total elimination of line clogging caused by sample condensation with this total hydrocarbon analyser.
Designed and manufactured specifically for industrial use, this total hydrocarbon analyser is the ideal choice for process and stack monitoring in a wide range of applications. Application include those requiring CFR 40 PART 60 METHOD 25A, such as catalytic and thermal oxidizers, solvent recovery systems, wast incinerators, and power plants.
The Model 650 Total Hydrocarbon Analyser is also suited for inert process monitoring in chemical and petrochemical process applications.