Australia's #1 industrial directory for equipment & suppliers

New Axcess Chip to operate as Active or Passive

Supplier: Electro-Com (Australia) Pty Ltd
27 October, 2006

The new Enterpirse Dot active-passive technology will allow tags to switch to the appropriate protocol for communications. This unit provides greater options for data storage and sensor output.

Axcess International who are an RFID tracking solutions provider is developing a dot-sized UHF RFID chip with built in digital input-output and analog-to-digital conversion to connect with sensors. Axcess International says the chip will be available in the first quarter of 2007. The new technology, known as Enterprise Dot, provides dual active-passive capabilities, as either a passive EPC Gen 2 tag operating at 860 to 960 MHz, or as an active tag operating at 433 MHz. This allows the tag to switch to the appropriate protocol for communications. It also provides greater options for data storage and sensor input.

The first product using the Enterprise Dot technology will be software definable battery powered Dot-OEM, a tag module containing the Dot chip and options for battery, antenna, memory and external sensors. The Dot-OEM is about the size of a quarter and can be embedded in computers and other products.

The Enterprise Dot chip is small enough to fit in identification cards, and will also be targeted for tracking computers and medical equipment. Axcess International is calling this the worlds lowest cost and smallest multifunctional wireless submicro device for asset tracking. The chip is customisable by connecting to additional ports for sensors and memory storage for data logging or for product pedigree applications that document the chain of custody of products as they move through distribution channels.

Axcess International began developing this technology two years ago, in the pursuit of a small chip with which other products can be built. Enterprise Dot's use of dual active-passive technology is designed to solve such reliability problems as poor read rates surrounding passive RFID. Its passive transponder is compatible with the EPC Class 1 Gen 2 standard.

The active RFID side of the dot uses Axcess ActiveTag technology, transmitting data up to 100 feet when activated. RFID interrogators used by Enterprise Dot customers can be connected via TCP/IP, RS232, Wiegand or other standard networks, to enterprise system software, existing security alarm equipment and standalone middleware and end-user software such as online supervisor.

To function as an active tag, the devise can be awoken by activator points transmitting a 126 kHz signal. When functioning as a passive tag, the Enterprise Dot tag operates the same as any passive EPC Gen 2 tag and does not need to be activated by a low frequency signal before being read. In passive mode, the tag can be read by any Gen 2 compliant RFID interrogator, regardless of make or model. The tags also work effectively around metals and liquids.

The Enterprise Dot-OEM module has not yet been piloted by any Axcess customer, and will be commercially available in the first quarter of 2007. The chip will be compliant with EPCglobal standards for Gen 2 systems, and will be submitted for compliance testing once it is released.