Rittal RimatriX5 solves the problem of climate control for high heat losses per rack with the Liquid Cooling Package (LCP) range.
Extremely high heat loads are dissipated from the rack via the LCP air/water heat exchanger. Additionally, this system also allows temperature-neutral expansion of the data centre.
Installation while operational
Air/water heat exchanger (10 kW) to support climate control of the room. For Rittal racks, the relevant door is preconfigured in the factory and exchanged on site.
Suitable for use on any surface
The stand-alone unit may be fitted onto any suitably sized rear door (including other brands).
Water connection variants
Water connection either at the bottom or top. Connection to the existing cooling circuit (optionally via water/water heat exchanger) or to recooling systems.
Bayable with TS 8 server racks
As the height and depth are identical, it may be bayed either in the middle of an enclosure suite or at the end, for added assembly and service-friendliness.
Up to 20 kW useful cooling output
The useful cooling output is achieved with a modular configuration (1 - 3 modules).
Active condensate management supports inlet temperatures from +6°C to +20°C.
Safe insertion, simple assembly
The separation of cooling and rack prevents water from penetrating the server rack.
A recooling system supplies the required cooling fluid.
Up to 40 kW useful cooling output
Useful cooling outputs of 28 kW (rack height 2000 mm) or 40 kW (rack height 2400 mm) are achieved with 6 or 8 high-performance fans, which may be exchanged without the need for tools.
Overall, the LCP Plus has been optimised for use in data centres. Even with the enclosure doors open, e.g. during servicing work on servers, climate control is 100 % guaranteed.