Australia's #1 industrial directory for equipment & suppliers

Saw Spindle - felder KF 700 S Professional

Supplier: Felder Group Pty Ltd

A saw spindle combination from Felder, is an investment in 2 high quality, professional and independant machines.


The new FELDER 700 Circular Saw Unit
Constructed completely out of cast iron, the new Felder 700 Series saw unit represents a new era of running stability and efficiency.

  • 104 mm cutting height with a 315 mm saw blade operates with groover up to 19.5 mm
  • Electrical height adjustment with LED display
  • Zero point tilt
  • Large dimensioned saw arbor with double
  • bearing seats
  • Maximum energy transfer thanks to the large Poly-V belt
  • Optimal extraction with the completely enclosed, below table extraction system
  • Precise height adjustment via precision linear guides
  • High precision double-sided support system
  • Tilt segment "Easy-Glide":
    • High durability
    • Play-free tilt
    • Unaffected by dust
    • Completely maintenance free
    • No lubrication required 

Circular saw shaft
The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect transmission of power to the saw blade.
To use a grooving cutter "Dado cutter"
The Felder 700 Series saw unit is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.
Angle adjustment and fence length compensation:
No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed without losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons, e.g. 5.625º (32 sided), 11.25º (16 sided), 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working in slide to cut or push to cut mode. Every index position is equipped with a length compensator. The highly precise Felder degree index system is adjusted in the factory. Every index position also has individual fine adjustment. The index system, which integrates well into the machine design, increases your
productivity to achieve unrivalled cost effectiveness.
Crosscut fence
The crosscut fence 1100 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position. The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value. The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This means the crosscut fence stop remains firmly in place, especially useful when crosscutting pre-mitred workpieces.
Outrigger tables "1300" and "1500"
The outrigger table "1300" comes as standard on S-Professional models. The workpiece roller at the end of the outrigger assures an easy loading process. The telescopic fence can be positioned as desired from 90 to 45 degrees. For those who require even more support surface, there is the optional upgrade to the "1500" outrigger at no additional cost.
Precision mitre index system: exact angle precision
The "precision mitre index system" on the outrigger table of the professional model allows you to freely select ­preset positioning stops at increments of 5°, but also at 22.5°, by means of the index locating pin from +45° to –45°.
Scoring unit
The scoring unit for cuttings in plastic laminated panels without tear outs. Backlash free height and lateral adjustment of the scoring saw blade, drive power of the industrial scoring unit 1.0 HP.
Precision sliding table – with "X-Roll" guiding system
The Felder precision sliding table has been designed to accept maximum loads while retaining its smooth operation and accuracy. The "Monoprofile" of the sliding table and base guarantees maximum ­torsional strength at every temperature. Through the “X" formation of the roller bearings the load is optimally distributed to all sides. The "X-Roll" guiding system and other numerous outstanding details are patented. Such precision and technology earns the right to the status of "World Class".
The new FELDER "700" Spindle Moulder Unit
With a completely new design, the Felder "700" spindle unit sets new standards!

  • Spindle operating height of up to 115 mm
  • Table opening: 230 mm
  • Quick-change system for moulder spindle
  • 4 Operating speeds (3500, 6500, 8000, 10,000 rpm)
  • Change of speed from front of machine
  • Fully compatible with high speed router spindle at 15,000 rpm
  • Tilts backwards 0° to 45°
  • Electrical height adjustment with LED display
  • High precision double-sided support system
  • Dovetail guidance system for height adjustment
  • Maximum energy transfer thanks to the large Poly-V belt
  • Excellent vibration absorption from heavy cast iron unit
  • Tilt segment "Easy-Glide":
    • High durability
    • Play-free tilt
    • Unaffected by dust
    • Completely maintenance free
    • No lubrication required 

High-Speed Router Spindle
The high speed router spindle is designed for router shaft diameters of Ø 6–16 mm at a running speed of 15,000 rpm.
Small details - Big impact!
The tilting segment on the Felder 700 series has one small but important detail: it is completely free of lubrication!
Spindle moulder tiltable from
All Felder spindle moulders tilt 90°–45° as standard.As soon as you begin working on your machine, you’ll see that your Felder's range of applications is much wider than you might have expected and you save a lot on tools too. Using the hand wheel causes the whole moulder spindle unit to tilt to the requested angle easily and smoothly.

Precise slots and tenons
Accurate slots and tenons are much easier with the ­Felder "X-Roll" sliding table. This precision guiding system will bear heavy loads without compromising the smooth and accurate stroke of the sliding table. The "X"-configuration of the roller bearings optimally distributes workpiece weight to all sides. With conventional sliding tables, ball bearings are used in the guiding system. A ball bearing system creates a singular point of contact between the bearings and the flat guiding tracks. The singular point of contact will eventually wear grooves into the tracks and as a result, sideways play will develop in the sliding table. It is physically impossible for the “X-Roll” system (with roller bearing lineal contact) to wear grooves into the guiding tracks, hence the system will always remain play-free and is backed with a 6-year factory guarantee.
The precision "240" spindle fence and the large spindle opening
The "240" spindle fence is standard equipment on the spindle moulders. The spindle fence can accommodate tooling to a maximum of 230 mm and has a fine adjustment on the spindle fence outfeed side. The integrated dust extraction connector allows for chip removal. The spindle table opening is 230 mm. That is your advantage when panel-raising ­­– the spindle tooling can be lowered under the table.
Multi fine adjustment system
The MULTI-adjustment system allows quick adjustment to the workpiece diameter, also ensuring parallel running of the moulder fence.

  • automatic repeat setting after removal of your fence
  • parallel adjustments of the moulder fence
  • quick and accurate adjustment
  • measurement scale for depth of cut

Safety bar guides
The safety bar guides, great for "end-grain" work (optional).
Your Felder spindle tilts ­"backward" with operational comfort and for the following ­reasons.

  • Safe operation
  • Suitable for any workpiece size
  • Problem-free power feeder application
  • Impeccably machined surface
  • Optimal chip removal

The rip fence
The rip capacity comes at 800 mm or optional 1250 mm. The rip fence almost hovers over the table. The single handed quick clamping and fine adjusment systems ensure quick and accurate setting of the rip fence. The easy to read rip scale is perfectly integrated into the saw table. The aluminium rip fence plate can be moved backwards to optimise the feed of workpieces. When working with narrow and thin cuts of wood or with the saw blade tilted, it can be inverted and used in the lying position.