Australia's #1 industrial directory for equipment & suppliers

Scout Mark V Drill Rig

Supplier: Hydrapower

Specifications of Scout Mark V Drill Rig:


  • Recommended Base (Minimum):
    • 4 x 4 Truck with a 13 t GVM and a 4.5 m wheelbase
    • Tracked Crawler with 6.3 t load capacity
  • Rig Engine: 4 cylinder Cummins CPAK-4BTA3.9-C turbo motor with 125 hp at 2200 rpm
  • Rig Hydraulics:
    • Sauer Danfoss proportionally controlled control valves
    • Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions
  • Rotary Drive:
    • Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing
    • Two Speed, 0 - 150 rpm & 0 - 700 rpm
    • Low speed torque to 2100 Nm, high speed torque to 474 Nm
  • Head Travel: 5.1 m standard, 6.8 m optional
  • Main Winch:
    • Maximum pull is 4200 kg
    • Maximum line speed is 28 m/min
  • Wireline Winch:
    • (2) Two of in standard configuration
    • Maximum pull is 780 kg
    • Maximum line speed is 83 m/min
  • Pulldown:
    • Electrically controlled with dial for speed control
    • Pull down capacity is 4400 kg
    • Pull out capacity is 6500 kg
  • Mast:
    • Fitted with 1.8 m mast dump for angle drilling
    • Standard length is 8.1 m, supplied with hydraulically operated breakout spanner
    • Supplied with hydraulic circuit with quick-connect couplings for optional breakout table
  • Brakeout Table: Optional fixed or split type table
  • Rod/Auger Guard: Optional, can be fitted with hydraulic lockout on head rotation
  • Tool Cabinet: Optional
  • Rig Body: Supplied with operator's platform, (4) four stabilizer legs with burst valve protection and fuel tank. Rig body and mast painted in Hydrapower Red and Black
  • Toolkit: Flags for rear of mast, mast lock plates, parts and maintenance manual for rig and engine, and hydraulic pump test point pressure gauges