SEGMENsensor - capacitive sensor 12mm NPN/PNP

capacitive sensor 12mm NPN/PNP

Capacitive sensors detect objects and the fill level of all non-conducting materials, liquids, pellets, and powders directly or through a container wall.

In Stock

Features of this product

One-piece housing with high-brightness LED indicator
IP67 protection class which is effectively moisture-proof and dust-proof
Enhance detection distance. Sensitivity adjustment adopts multi-turn potentiometer so as to reach higher adjustment accuracy
High reliability, excellent EMC design with protection against short circuit, overloaded and reverse polarity
Widely used in both metal and non-metal (plastic, powder, liquid, etc.) material testing

Specifications of this product

Installation type	Non-flush	Indicator	Output indication:Yellow LED
Rated distance Sn	8mm	Switching frequency	25Hz
Ensure distance Sa	≤5.76mm	Ambient temperature	When working:-25…70?(No icing, No condensation)
Adjust the distance	3…12mm		When storing:-30…80?(No icing, No condensation)
Adjustment method	Single-turn potentiometer	Environment humidity	35...95%RH(No icing, No condensation)
Standard test object	Fe 24241t(Grounded)?	Vibration resistant	10...55Hz,Dual amplitude 1mm(2 hours
Supply voltage	10...30VDC		each in X, Y, and Z directions)
Load current	≤200mA	Impulse withsand	30g/11ms,3 times each for X,Y,Z direction
Residual voltage	≤2V	High pressure resistant	1000V/AC 50/60Hz 60s
Consumption current	≤20mA	Insulation resistance	≥50MΩ(500VDC)
Switch point offset [%/Sn]	≤±10%	Shape specification	M12180mm
Temperature drift [%/Sr]	≤±20%	Protection degree	IP67
Hysteresis range [%/Sr]	3...20%	Housing material	Nickel copper alloy
Repetitive error [R]	≤5%	Connection type	M12 Connector
Circuit protection	Short circuit protection, Overload protection,	Accessories	M12 nuts×2, Slotted screwdriver, Operation manual
	Reverse polarity protection

To contact SEGMENsensor Co. Ltd about SEGMENsensor capacitive sensor 12mm NPN/PNP use Get a quote.

Features of this product

One-piece housing with high-brightness LED indicator
IP67 protection class which is effectively moisture-proof and dust-proof
Enhance detection distance. Sensitivity adjustment adopts multi-turn potentiometer so as to reach higher adjustment accuracy
High reliability, excellent EMC design with protection against short circuit, overloaded and reverse polarity
Widely used in both metal and non-metal (plastic, powder, liquid, etc.) material testing

Specifications of this product

Installation type	Non-flush	Indicator	Output indication:Yellow LED
Rated distance Sn	8mm	Switching frequency	25Hz
Ensure distance Sa	≤5.76mm	Ambient temperature	When working:-25…70?(No icing, No condensation)
Adjust the distance	3…12mm		When storing:-30…80?(No icing, No condensation)
Adjustment method	Single-turn potentiometer	Environment humidity	35...95%RH(No icing, No condensation)
Standard test object	Fe 24241t(Grounded)?	Vibration resistant	10...55Hz,Dual amplitude 1mm(2 hours
Supply voltage	10...30VDC		each in X, Y, and Z directions)
Load current	≤200mA	Impulse withsand	30g/11ms,3 times each for X,Y,Z direction
Residual voltage	≤2V	High pressure resistant	1000V/AC 50/60Hz 60s
Consumption current	≤20mA	Insulation resistance	≥50MΩ(500VDC)
Switch point offset [%/Sn]	≤±10%	Shape specification	M12180mm
Temperature drift [%/Sr]	≤±20%	Protection degree	IP67
Hysteresis range [%/Sr]	3...20%	Housing material	Nickel copper alloy
Repetitive error [R]	≤5%	Connection type	M12 Connector
Circuit protection	Short circuit protection, Overload protection,	Accessories	M12 nuts×2, Slotted screwdriver, Operation manual
	Reverse polarity protection