Our range of self clinching studs include
PTFH (flush-head) studs are available in aluminium, steel or stainless steel. They are also available unthreaded on special order.
PTFH4 (flush-head) Studs for stainless steel are designed to provide strong threads in stainless steel sheets as thin as 1mm. The type is designed for use in stainless steel sheets with a hardness of 92 or less on the Rockwell "B" scale.
PTTFH(nonflush) Studs are for sheets as thin as 0.51mm.They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same way as flush-head studs;however, different punches and anvils are required. When installed, the TFH stud will be securely locked into the thin sheet with ample torqueout and pushout resistances. The stud head will not be flushed but will project above the sheet surface approximately 0.64mm.
PTHFH (heavyduty) Studs replace weld studs with easier installation at lower costs. The large stud head which projects above the sheet material distributes the axial tightening force over a large area
therebyimproving pull through resistance.
PTHFHB (heavyduty BUSBAR) Studs are ideal for applications which demand superior electrical/mechanical attachment points. Phosphor bronze studs offer twice the conductivity of carbon steel studs.
PTTPS Pilot Pins satisfy a wide range of positioning, pivot and alignment applications. The chamfered end makes mating hole location easy.