Self Cleaning Strainer | Hyper-Jet Model 751 Get latest price

Read more...

To contact Absolute Filters about Self Cleaning Strainer | Hyper-Jet Model 751 use Get a quote.

The Hyper-Jet® is very effective in system applications where operating pressure is low (under 5 psig) or where the system debris has particularly difficult removal characteristics.

The model 721/751 strainer provides unattended service with the addition of external backwash fluid that enhances the selfcleaning attribute over other automatic strainers.

Application:

• The Hyper-Jet's® unique patented backwash system coupled with the strainer element design permits installation in a broader range of system applications. This scope of operations includes from relatively low pressure to very high pressure and from withdrawing coarse, easily removed debris to fine, sticky debris.
• In a low pressure mode (such as on the suction side of a pumping system), the Hyper-Jet® system is mounted on the leading edge of the strainer backwash arm (Fig. 2). External fluid is directed at an incident angle over the inside surface of the straining element through the high-pressure nozzle assembly. The high velocity of this spray assists the cleaning of the wedge-wire straining element. External source pressure must be a minimum of 30 psi over system operating pressure.
• Hyper-Jet® strainers are used to protect equipment such as pumps, motors, heat exchangers, or spray nozzles, as well as process applications such as cooling towers or virtually any similar application.
• The 721/751 Hyper-Jet® Self-Cleaning Strainers are fabricated in pipe sizes ranging from 1" to 36" to suit most application requirements. The Hyper-Jet® System can also easily and economically be field installed in any Fluid Engineering Self-Cleaning Strainer (6" size and larger) in service as a retrofit installation.

Proven features include:

• A unique patented spray assisted/ mechanical backwash mechanism for extended service life.
• A clog-resistant straining element (wedgewire configuration) to reduce maintenance downtime and operator assisted attention.
• All internal replacement parts supplied in corrosion resistant materials (special material available on request).
• An efficient, effective cleaning mechanism which reduces annual maintenance, requiring fewer parts.
• A low rpm backwash cycle provides more efficient cleaning, less wear (no contact between rotating parts) and longer duty cycle on motors and speed reducers.
• Any existing Eliminator® (6" and up) can be converted to the Hyper-Jet®.

Strainer options available:

• Cover Lift: Assemblies:Recommended for remote locations.
• ASME: ASME Section VIII, Division 1. 10 CFR 50 Appendix B. ASME Section II, Class 3.
• Materials of Construction: Consult factory for stainless steel, copper nickel, monel, or other requirements.
• Control Package: Control Panel, Backwash Valve with electric operator, single element differential pressure switch.
• Design: High-pressure applications, please consult the factory.
• Hyper-Jet: Low pressure and special applications.
• Skid packages: All equipment desired, including strainers, valves, controls, wiring, piping, and skids may be combined as a complete, custom package. Size of the project has no limitation.

Read less...

To contact Absolute Filters about Self Cleaning Strainer | Hyper-Jet Model 751 use Get a quote.