Australia's #1 industrial directory for equipment & suppliers

Thermal Imaging Cameras | SC35, SC15 & SC5

Supplier: FLIR Systems Australia

Thermal imaging cameras can be used for a wide variety of R and D applications.


With the extremely affordable SC35, SC15 and SC5 Packs, FLIR Systems is now bringing the advantages of thermal imaging to the test bench of every R and D engineer. The FLIR SC35, SC15 and SC5 Packs are not only extremely affordable. They contain both the hardware and software for analysing and verifying your R&D projects. With the FLIR SC35, SC15 and SC5 Packs you will be able to visualise temperature and to measure temperatures in a non-contact mode.

The following packs are available:


SC35 Pack

SC15 Pack

SC5 Pack

Thermal imaging camera

A35 sc

A15 sc

A5 sc

Image quality

320 x 256 pixels

160 x 128 pixels

80 x 64 pixels

Lens focal length

9 mm

9 mm

5 mm


FLIR Tools+

FLIR Tools+

FLIR Tools+

Furthermore, each Pack contains a hard case, goose neck with foot and 2 cable straps, 2 Ethernet cables, base mount, focusing tool, PoE injector, and a power cable.

FLIR Axx sc Series thermal imaging camera: compact and complete

The Axx sc Series thermal imaging cameras visualise temperatures between –40°C and +550°C. Temperature differences as small as 50 mK become clearly visible on a crisp thermal image. Since the FLIR Axx sc Series comes with Power over Ethernet, communication and power are supplied with only one cable.

Connection interfaces

The FLIR Axx sc Series comes standard with GigE Vision compatibility. GigE Vision is a new camera interface standard developed using the Gigabit Ethernet communication protocol. GenIcam support is also provided. The goal of GenICam is to provide a generic programming interface for all types of cameras. Regardless of interface technology (GigE Vision, Camera Link, 1394 DCAM, etc.) or features implemented, the Application Programming Interface (API) will always be the same.

It is also possible to configure one camera to be master and others to be slave(s) for applications that call for more than one camera to cover the object or for stereoscopic applications.

Software included in the SC35, SC15 and SC5 Packs

FLIR Systems realises in an R and D environment a thermal imaging camera is just one part of the solution. Software to analyse the thermal image is equally important.

FLIR Tools+ software is included with every SC35, SC15 and SC5 Pack. The FLIR Axx sc Series thermal imaging cameras work seamlessly together with FLIR Tools+. It allows for viewing, recording and analysing thermal images and includes functions such as time versus temperature plots.