When stock picking from pallets under racking, if the front cartons have been removed, the operator then has to bend down, reach in, and lift the rear cartons out.
With operators lifting even a 10 Kg carton, several hundred times a day, the cumulative total can reach 1 – 2 tonnes, so any product which can help alleviate this back aching task will be welcomed.
EASY PICKER was designed to solve this particular problem, which accounts for many sore and aching backs, time off and insurance claims.
EASY PICKER has a base frame with a sliding deck attached to it. The deck is fitted with a manual turntable. The pallet full of product is placed on to the turntable by forklift.
In order to reach those hard to get at cartons at the rear, the frame is slid out and the pallet rotated. When pushed back in, the back is now at the front. It’s that simple!
The unit is only 120mm high, so there is very little overall load height difference.
Finish is powder coated safety yellow (or could be in zinc plated finish or mill finish stainless steel). Varying capacities and sizes are also available for almost any scenario.
The Easy Picker was a finalist in the 2010 WorkSafe Awards.
EASY PICKER – LIFTER
This is the same as previously described, but with a spring assisted scissor lift built in. So if you not only hate the thought of getting in and under pallet racking to retrieve your goods, then the EASY PICKER – LIFTER will also raise them up to a comfortable working height, so even the bending is eliminated.
The unit is slid out from under the racking to enable the forklift to load the pallet onto the turntable which will sink under the weight of the load, and will gradually move up as cartons are removed.
- Powdercoat as standard
- Hot dip galvanised for outdoor
- Zinc plated or stainless steel for food industry
- 5 year against faulty materials and workmanship.
- Full range available