Australia's #1 industrial directory for equipment & suppliers

Vacuum Turning Bench by Millsom Materials Handling

Supplier: Millsom Materials Handling

Easy to use, and efficiently paced work capacity. Safely turn over unsafe materials to 180 degrees with Millsom's Vacuum Turning Bench.


With the turning bench VWT 180° from Schmalz, unwieldly wood, metal and plastic panels can easily be turned over with speed and efficiency.

The workpieces can be stopped at any angle for inspection or futher processing and can then be either returned back to its original position, or can be flipped over 180°.

Turning workpieces through 180°

A Single Person Operation

A single operator can load and unload a CNC machining centre quickly and safely.

The workpiece is then placed with the JUMBO on the turning bench, where it can be turned to any desired angle for further processing. After this, the panel is moved again with the JUMBO to the machining centre.

Features of Vacuum Turning Table Include:

  • Solenoid Valve which ensures that the workpiece can only be released at the end position of the bench.
  • Audible warning device: remains functional even in the case of a power failure.
  • Operator stand:
    • All controls ergonomically positioned
    • The operator is kept well away from the danger area
    • Simple maintenance because all electrical and pneumatic components are integrated
  • Geared motor directly mounted to the rotation shaft:
    • Increased speed of motion
    • Vibration-free turning, gentle starting and stopping
    • Reliable operation. No drive chains requiring adjustment
    • Less wear and tear

Applications of Vacuum Turning Table Include:

  • Machining both sides of wood or plastic panels
  • Final Finishing
  • Edge Treatment
  • Quality Treatment
  • Assembly Work
  • Assembly work on both sides
  • Quality inspection of both sides of workpieces
  • Machining of edges

Requirements of Vacuum Turning Table:

  • Air-tight surface - (Porous panels possible at reduced load capacity, suction test recommended)
  • Max weight - 150kg
  • Max work-piece size - 3000mm x 2000mm
  • Max thickness - 50mm

Options of Vacuum Turning Table:

  • Foot switch
  • Larger vacuum pump
  • Various sized vacuum gripper plates

For further information about Vacuum Turning Table visit Millsom Materials Handling at
Use the IndustrySearch e-mail feature below and one of the Millsom Materials Handling team will respond to your enquiry directly.

Innovators, Manufacturers & Distributors Of Materials Handling Equipment.