Paton - 1.5 Tonne Wheeled Feeder Price Guide: $3,525 Get latest price

1.5 Tonne Wheeled Feeder

1.5 Tonne Wheeled Feeder

1.5 Tonne Wheeled Feeder

1.5 Tonne Wheeled Feeder

1.5 Tonne Wheeled Feeder

In Stock

The Paton 1.5 tonne Wheeled Feeder is designed with simple stock management in mind. Available in both Sheep and Cattle Variants.

Tow from the silo to the paddock and simply relocate when necessary to minimise pasture damage. These offer the farmer a far more practical solution for herd management and feeding. Remember when the country gets wet, stock pug up around the feeder leaving quite a mess sometimes. When you pick the feeder up behind the tractor and take it to the silo for refilling, you can bring it back and relocate it to a new dry area in the paddock….or to the next paddock if you are about to move stock. Being a wheeled unit, you eliminate the need for a front end loader to shift your feeder and potential damage in transport. This model requires a tractor and linkage bar to tow, and to raise and lower the unit while transporting.

You can nominate the hitch type for these wheeled units, either a tow ball, single tongue, or double tongue option. Also a rear hitch point allows two wheeled feeders to be attached and towed in tandem. These feeders come with a jack stand to assist in the hitch to fixed height vehicles.

The lick door on these feeders is suitable for feeding grain, pellets or heavy chopped and mixed feeds. The specially designed trough and lick door system contain no sharp or rough edges, are soft on the animals mouths and eliminate all waste, allowing your feed to go further.

The Cattle Variant comes with a full anti-rub frame to prevent animal and tractor operator damage.

Please specify your preference of Sheep or Cattle when ordering.

• Sheep Unit: Model Code – LFMF24W – $3357.00
  
• Cattle Unit: Model code – LFMF24CW – $3733.00

100% Australian made.

 

Wheeled Version

• Strong base frame
• 100% galvanised construction for longevity
• Internal bracing
• 14” rims and tyres
• Simple and easy to adjust lick doors
• Suitable for pellets, grain and heavy chopped or mixed feed
• Rear tow hitch
• Tow from the silo to the paddock with ease and convenience
• Minimise pasture damage through simply rotation of unit

 

Read more...

To contact Paton Industries about Paton 1.5 Tonne Wheeled Feeder use Get a quote.

The Paton 1.5 tonne Wheeled Feeder is designed with simple stock management in mind. Available in both Sheep and Cattle Variants.

Tow from the silo to the paddock and simply relocate when necessary to minimise pasture damage. These offer the farmer a far more practical solution for herd management and feeding. Remember when the country gets wet, stock pug up around the feeder leaving quite a mess sometimes. When you pick the feeder up behind the tractor and take it to the silo for refilling, you can bring it back and relocate it to a new dry area in the paddock….or to the next paddock if you are about to move stock. Being a wheeled unit, you eliminate the need for a front end loader to shift your feeder and potential damage in transport. This model requires a tractor and linkage bar to tow, and to raise and lower the unit while transporting.

You can nominate the hitch type for these wheeled units, either a tow ball, single tongue, or double tongue option. Also a rear hitch point allows two wheeled feeders to be attached and towed in tandem. These feeders come with a jack stand to assist in the hitch to fixed height vehicles.

The lick door on these feeders is suitable for feeding grain, pellets or heavy chopped and mixed feeds. The specially designed trough and lick door system contain no sharp or rough edges, are soft on the animals mouths and eliminate all waste, allowing your feed to go further.

The Cattle Variant comes with a full anti-rub frame to prevent animal and tractor operator damage.

Please specify your preference of Sheep or Cattle when ordering.

• Sheep Unit: Model Code – LFMF24W – $3357.00
  
• Cattle Unit: Model code – LFMF24CW – $3733.00

100% Australian made.

 

Wheeled Version

• Strong base frame
• 100% galvanised construction for longevity
• Internal bracing
• 14” rims and tyres
• Simple and easy to adjust lick doors
• Suitable for pellets, grain and heavy chopped or mixed feed
• Rear tow hitch
• Tow from the silo to the paddock with ease and convenience
• Minimise pasture damage through simply rotation of unit

 

Read less...

To contact Paton Industries about Paton 1.5 Tonne Wheeled Feeder use Get a quote.

Brochure(0.69MB)