Industry Search Australia Trusted by 600,000+ buyers

1,800 Horse Power-- 1000 KVA CUMMINS ELECTRICAL GENERATOR

Supplier: Bi-tron Lubrication
07 November, 2019

Application: The Bitron Treatments were ADDED as an additive package to motor oil and fuel in 1,800 Horse Power diesel engine driving 1000 KVA CUMMINS electrical generator: as anti-wear protection and reduction in fuel and oil consumption during normal operation.

User: Asphalt Quarry

The above 1000 KVA Cummins Generator driven by 1,800 horse power engine was in service for more than 30,000 hours. According to the manufacturer’s instructions, oil and oil-filters had to be replaced every 25 hours.

BiTron Engine Treatment was added after the generator was in service for about 5,000 hours.

Within a very short time of using BiTron Engine Treatment and BiTron Fuel Conditioner an average of 10% reduction in fuel consumption was recorded. Based on used oil analysis the oil change intervals were extended to every 1,000 hours and then to every 1,500 hours. Typically, this type of engine is overhauled after 17,000 hours in operation.

In this specific case the engine was taken apart after 30,000 hours not because it had to be overhauled, but,  because of penetration of water into its oil system. In spite of the water, there was no indication whatsoever that the engine was deteriorating in performance.

Nevertheless, after 100 hours in operation with water presence in the oil system, the general manager of the quarry decided to take the engine apart. “I have seen too many times what presence of water in the oil system can do to an engine, I don’t want to stretch my luck.” The general manager of the quarry was very impressed when he was told by the head mechanic in the repair shop that the engine parts looked like new and that he thought that there must had been a mistake in the paperwork, because the condition of the engine parts didn’t have any indication whatsoever that the engine was in operation for 30,000 hours or that water penetrated the oil system. The engine was put back together without replacing or machining any parts.

According to our most conservative estimate, over 30,000 hours that the generator was in operation, the user saved at least $150,000 on repairs, fuel and oil consumption. The user spent only $7,690 on BiTron Treatments, a return of approximately $20 on each dollar invested in BiTron.

( In addition to the above information, there are lots of pictures of individual parts and comments about their excellent condition after 30,000 hours of operation;  from being treated with these amazing Bitron Treatments. These pictures are available on request. ALL parts showed nil wear. In fact the hone marks are still visable on the cylinder walls.)