The Protinus 1000 utilises two measurement methods to ensure accurate real-time dust measurements of TSP, PM10 or PM2.5.
When correlated against the monitor’s gravimetric sample filter, forward light scatter method provides accurate and instantaneous measurement of dust concentrations.
Gravimetric Sampling Filter method samples dust onto an internal 47 mm filter for use in correlating the light scatter method. Filter can also be used for later chemical analysis such as XRF to determine heavy metal concentrations.
Measurement errors induced by changes in ambient relative humidity are eliminated by incorporating an inbuilt sample heater controlled by a relative humidity sensor.
Available on its own or as a full turn-key installation, the Protinus can be combined with a solar panel, wind speed and direction sensor, modem, and data collection software – a powerful tool for remotely quantifying dust emissions from around any site.
DATA LOGGINGAverage period: 1 – 60 minutes selectable
Display: 4 x 20 LCD
Outputs analog: 0 – 1, 0 – 2.5, 0 – 5 VDC, RS232
Data storage capacity: 12000 Records
Universal voltage power supply
47 mm filter holder
Internal battery charger
Digital output cable
PM10, PM2.5, PM1 Sharp-Cut Cyclone
Modem (radio or 3G)
Wind speed / direction sensor
External battery cable.
LAF Technologies | Scientific & Environmental Equipment
Established in 1987 and representing some of the world’s leading scientific and environmental equipment manufacturers, LAF Technologies (Laftech) has rapidly grown to become one of Australasia’s largest, ...