Australia's #1 industrial directory for equipment & suppliers

1030 Microcal (Combined Voltage & Current Source)

Supplier: TEX Onsite

The 1030 is a compact, low cost, portable voltage and current calibrator for general purpose signal injection. It is suitable for voltage and current loop signal simulation as well as thermocouple simulation. The precision 10-turn dial provides a conventional feel to setting the output with a setting resolution of 1 part in a 1000 (0.1%)

CONTACT THIS SUPPLIER TO FIND OUT MORE

  • 3 voltage ranges to 1V
  • 2 current ranges to 100mA
  • 0.1% accuracy
  • Compact
  • Portable and battery powered

Three voltage ranges give an adjustable output from 10uV to 1V and two current ranges for 10uA to 100mA.

An additional 0 to 8V output can be obtained by using a precision 1Kohm resistor that is supplied with the unit. The resistor is connected across the output terminals and the 10mA current range selected. This allows the output to be set between 0 and +/- 8V with a 10mV resolution and an accuracy of 0.3% of full scale.

The 1030 current and voltage calibrator is simple to operate and does not require any standardisation prior to use. The operator needs only to switch on, check the battery condition, and set the required range and output value.

This precision handheld calibrator is one of the Time Electronics portable testing equipment line, with multiple testing and measurement capabilities it delivers accuracy and reliability in one instrument.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more