Fully Extended - 200 pounds/lineal foot
- Rollers
- S-1-3/8" OD (Outside Diameter), galvanized steel rolled with sealed ball bearings and spring-loaded axles.
- Axles
- 5/16" full -length steel axles at leg point assembly and spring-loaded connections at side links.
- Axle Centers
- Standard 5-1/4" axle centers. To accommodate small packages, restrictors are also available for 3" or 4" centers.
- Leg sets and 4-Point Connection
- 1-1/8" OD (Outside Diameter),
- 12-gauge steel tubing with adjustable reinforced inner leg and double cross-braces, zinc plated.
- Incremental height marks are provided on outer leg to facilitate uniform pitch adjustment.
- Four-point bolted leg connection to axles and side links.
- Height Adjustment
- Standard: 28" to 36"
- Optional: 24" to 28" - 36" to 44" - 44" to 52"
- Side Links and Connections
- 7-gauge, zinc-plated steel.
- Top connections are provided by 5/16" steel axles with lock nuts.
- Cross-point connections are steel pivot pins with spring-loaded retainers.
- Bottom connections are a combination of pivot pins and 5/16" steel tie rods.
- Box Stop Handle
- Heavy-duty 1-1/8" OD (Outside Diameter),
- 12-gauge steel tubing with 1/4" steel brackets, zinc plated.
- Box stop folds down when connecting the conveyor to equipment or other conveyors.
- The box stop is also a convenient push/pull handle.
- Couplers
- To link conveyors together, each unit is equipped with one set of 7-gauge steel couplers opposite the box stop end.
- Couplers may also be added to the box stop end.
- Heavy-Duty Casters
- Standard: 5" x 1-1/2" swivel caster with heavy-duty stem.
- Casters with swivel/wheel lock pedal brakes are provided on the first and last leg sets.
