Home Trusted by 500,000+ buyers

200Tonne(Max) TMC PEPS200 Injection Moulder 1986

Supplier: CTS Plastics Machinery

CTS#41143 200Tonne(Max) TMC PEPS200 Injection Moulder 1986

Price Guide (Inc GST): POA

200Tonne(Max) TMC PEPS200 Injection Moulder 1986

Spare Hydraulic motor
Good condition

Mould Clamping Force 200
Mould Opening Force 7.2 Tonne
Mould Opening Stroke 430mm
Die Height Available 660mm
Size of Platens 770 x 670
Space between Tie Bars 522 X 425
Hydraulic Ejector Force 7.2 Tonne
Hydraulic Ejector Stroke 140mm

Tonne Screw Diameter 55mm
LID Ratio 18: 1
Injection Pressure 1610kg/CM2
Injection Volume 594 CM3
Injection Capacity 483 grams
Injection Rate 1040 CM3
Screw Speed 300 R.P.M.
Heating 13.1 kW
Power 22.5 kW

Total Installed Power 35.6 kW
Oil Tank Capacity 500 Litre (DTE26) Mobil
Machine Size 6.5 x 1.3 2 metres

Additional Features
1. Fixed and moving table centre hole bored to 125mm
2. Dual speed screw motor
3. Full Memo machine control
4. Additional 3 heating zones complete with plugs
5. Positive clamp stop. Die opening to 200mm min. Clamp open stop to be within 1mm repeatability.
6. Melt decompress - before and after screw rotation
7. Accumulator for increased injection rate
8. Purge guard
9. Special nozzle adaptor
10. Special ring check valve assembly
11. Special clamp sequence (clamp stroke)
12. Hunt stop

Moulding Sequence
(a) Mould close
(b) Hunt forward
(c) Inject
(d) Melt decompress (individually adjusted)
(e) Hunt retract
(f) Recharge
(8) Melt decompress (individually adjusted)
(h) Mould open to positive stop. Open stop position with 1mm repeatability.
(i) Special clamp sequence (clamp shake)

1. Clamp open fully to L.S.
2. Mid time over
3. Clamp close on timer, then reverse back L.S. controlled by operator counter adjustable movements to 9, then clamp close and repeat moulding sequence.

Showcase your business!

Connect with 500,000 industrial buyers annually

Learn more