The HMV Series are variable speed drive Stainless steel multistage vertical pumps. Designed for pumping
clean non-loaded fluids for pressurising systems; irrigation; drinking and glycol water; water treatment;
heating and air conditioning; washing systems.
Stainless steel suction and delivery manifolds, threaded and galvanised, with coupling sleeves for membrane vessels on the delivery side.
Unit base and support for the control panel in galvanised steel.
One check valve for each electric pump, installed on the suction side.
Ball valves with pipe union installed on suction side and delivery side of each electric pump.
One pipe stub for each electric pump, installed on the suction side, with a threaded hole for connection to the air supply.
Rubber vibration dampers with metalcore.
Pressure gauge with a radial connection.
2 x E Series VSD with set parameters in accordance with the connected pump.
The pressure sensor connected to the output manifold and electrically connected to VSD.
On request: Pressure tanks 8 litre – 100 litre
VSD Controllers and Connection
Control box with main switches (one for each pumping unit) to switch off the system, in ABS and IP55 insulation grade.
2 x VSD directly mounted on board of the pumps with pre-set parameters in accordance with the connected pump; available solution with E1 VSD (for pumps up to 2kW with single phase input voltage) or with E109 – E385 VSD (single phase input voltage up to 3 kW and with three-phase input voltage up to 45 kW.
Maxijet Australia | Pressure Pumps & Submersible Pumps
Maxijet Australia is an Australian owned wholesale company specialising in water conservation and water pumping for urban, rural, irrigation and commercial applications.
At Maxijet we are committed ...