EXAIR - 3" Adjustable Air Amplifier to Cool, Dry & Exhaust

Adjustable Air Amplifiers with swivel fittings cool inductively heated axles prior to installing the hubs.

Adjustable Air Amplifiers utilise the Coanda effect (a basic principle of fluidics) to produce outlet flows up to 24 times the compressed air consumed.  The compressed air exhausts through a ring nozzle, attaches to an internal contour, then flows toward one end. 

It creates a vacuum on the opposite end that pulls free air through the unit.  This induced air mixes with the compressed air for a high volume, high velocity outlet flow.  When set to a .002" (0.05mm) air gap supplied at 80 PSIG, the outlet flow is 2,323 SCFM when measured 6" (152mm) from the outlet.  Sound level is low at 83 dBA.  The vacuum and discharge end can be ducted using standard hose or tube.

Applications include cooling hot parts, exhausting smoke and fumes, distributing heat in ovens or molds, and drying components.  Construction is aluminium or stainless steel.  Additional sizes from 3/4" (19mm) up to 4" (102mm) diameter are available from stock.
 

To contact Compressed Air Australia about EXAIR 3" Adjustable Air Amplifier to Cool, Dry & Exhaust use Get A Quote.

Adjustable Air Amplifiers utilise the Coanda effect (a basic principle of fluidics) to produce outlet flows up to 24 times the compressed air consumed.  The compressed air exhausts through a ring nozzle, attaches to an internal contour, then flows toward one end. 

It creates a vacuum on the opposite end that pulls free air through the unit.  This induced air mixes with the compressed air for a high volume, high velocity outlet flow.  When set to a .002" (0.05mm) air gap supplied at 80 PSIG, the outlet flow is 2,323 SCFM when measured 6" (152mm) from the outlet.  Sound level is low at 83 dBA.  The vacuum and discharge end can be ducted using standard hose or tube.

Applications include cooling hot parts, exhausting smoke and fumes, distributing heat in ovens or molds, and drying components.  Construction is aluminium or stainless steel.  Additional sizes from 3/4" (19mm) up to 4" (102mm) diameter are available from stock.
 

Read less...

To contact Compressed Air Australia about EXAIR 3" Adjustable Air Amplifier to Cool, Dry & Exhaust use Get A Quote.