With its high accuracy (<0.5%, PF=1 ), the PM-3000 series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipment in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 200 A). It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CAN bus protocols for easy integration.
True RMS Power Measurements
Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
Current Measurements Up to 200 A with Different CT Ratio
Voltage Measurements Up to 500 V
Clip-on CT for Easy Installation
W Accuracy Better than 0.5% (PF=1)
Supports RS-485, Ethernet or CAN bus Interface
Supports Modbus RTU, Modbus TCP or CANopen Protocol
Supports 2 Power Relay Output (Form A)
ICP Electronics | Industrial & Embedded Computers
ICP Electronics Australia Pty Ltd are the Master Distributors for IEI Technology Inc. and ICP DAS Co. Ltd. ICP Electronics Australia is a wholly Australian owned company and provides the Australian ...