3D Printer Entry Level | RapMan 3.2

3D Printer | RapMan 3.2  Features

• Multiple heads
• Option of adding a second print head to the RapMan 3.2
• Two colour printing or support material for dual head RapMan
• Multiple materials, including bio - polymer
• Free firmware upgrades
• No annual maintenance contract

Technical specifications

• Overall size: 590W x 570D x 640H - without extruder head
• Weight: 17kg + filament material
• Print area: 270W x 205D x 210H max, dependent on head configeration
• Printing speed: Maximum 15mm3 per sec (print and material dependant)
• Power (max): 60W 5A @ 12V - head dependent
• Max extruder temp: 280°C
• Print volume: 13.3 litres
• X & Y drives: Timing belt, driven by microstepping stepper motor
• Z drive: Leadscrew, driven by microstepping stepper & timing belt
• Tolerances: Movement x & y +/-0.05mm, extruder nozzle Ø 0.5mm, z-axis
• Filament: 3mm Ø
• Spool capacity: 1kg

Electronics

• System is driven via USB stick, no requirement for a PC
• Touch Screen user-interface
• Full control during printing
• Boot-loadable upgrades via USB
• AXON 2.0 conversion software with user-friendly front-end GUI

Materials

• ABS - Acrylonitrile Butadiene Styrene (Colours: White, Black, Blue, Green, Red and Yellow)
• HDPE - High density polyethylene
• LDPE - High density polyethylene
• PP - Polypropylene
• uPVC - Unplasticised polyvinylchloride
• PLA - Polylactic Acid (Colours: natural, blue, red and green)
• Filament diameter: 3mm
• Supplied in 1kg spools

For more information on the RapMan 3.2 3D Printer please call or email for a direct reply.