Kyoritsu - 5020 TRMS Current / Voltage Data Logger

Supplier: OBIAT Electronics Pty Ltd

43 Recent Views In Stock

Compare

5020 TRMS Current / Voltage Data Logger

The Kyoritsu 5020 TRMS Current/Voltage Data Logger has three input channels for the simultaneous recording of load current and voltage.

Various measurements are available with four recording modes: Normal, Trigger, Capture and Power Quality Analysis.

The Kyoritsu 5020 data logger is capable of storing up to 60,000 measurements and features non-volatile memory that allows recorded data to be retained even if power is lost.

Kyoritsu 5020 Features:

Power Quality Analysis: Reference voltage, Swell, Dip, Short power Interruptions.
Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor.
Large capacity for storing 60,000 data points when 1 channel is used, and when all the three channels are used, 20,000 data points per channel can be recorded.
Lowpass Filter will filter out the harmonics (cutoff frequency = approx. 160Hz)
LED flickers when the preset current / voltage value is exceeded
The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
The last 10 recorded data points including time/date can be recalled on the logger display
Selection of One-time mode or Endless mode:
One-time on: Recording will stop when memory is used up
One-time off: Overwrite the old data, and store the latest data
Non Volatile Memory: Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years)
Battery power indicator: Indicates battery voltage in 4-levels (It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing)
User-friendly PC software “KEW LOG Soft 2” is supplied
Permits editing, analysis and graphical display of data.
Recorded data is downloadable onto a PC via USB cable.
Simplified Power Integration: (The “KEW LOG Soft 2” uses current and voltage recorded to calculate the integral power consumption).

Need more information? Message OBIAT Electronics Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.

Various measurements are available with four recording modes: Normal, Trigger, Capture and Power Quality Analysis.

The Kyoritsu 5020 data logger is capable of storing up to 60,000 measurements and features non-volatile memory that allows recorded data to be retained even if power is lost.

Kyoritsu 5020 Features:

Power Quality Analysis: Reference voltage, Swell, Dip, Short power Interruptions.
Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor.
Large capacity for storing 60,000 data points when 1 channel is used, and when all the three channels are used, 20,000 data points per channel can be recorded.
Lowpass Filter will filter out the harmonics (cutoff frequency = approx. 160Hz)
LED flickers when the preset current / voltage value is exceeded
The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
The last 10 recorded data points including time/date can be recalled on the logger display
Selection of One-time mode or Endless mode:
One-time on: Recording will stop when memory is used up
One-time off: Overwrite the old data, and store the latest data
Non Volatile Memory: Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years)
Battery power indicator: Indicates battery voltage in 4-levels (It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing)
User-friendly PC software “KEW LOG Soft 2” is supplied
Permits editing, analysis and graphical display of data.
Recorded data is downloadable onto a PC via USB cable.
Simplified Power Integration: (The “KEW LOG Soft 2” uses current and voltage recorded to calculate the integral power consumption).

Read less...

Need more information? Message OBIAT Electronics Pty Ltd via the form, or call and say you found them on IndustrySearch so they can best assist you.

Get more information

What would you like to ask OBIAT Electronics Pty Ltd about this product?*

Email*

Full Name*

Phone Number*

Company

Supplier

Call 02 9748 86..

Get a Callback from an expert

Supplier: OBIAT Electronics Pty Ltd

Distribution: Australia Wide

Location: Castle Hill, NSW

Customers: Electricians, Power, Mining, End Users

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. OBIAT Electronics Pty Ltd are also proudly displaying these credentials:

Established:

1986

Employees:

1-5

Customers:

Electricians, Power, Mining, End Users

Certifications:

All Products Certified

Distribution:

Australia Wide

Location:

Castle Hill , NSW