The maindraw back to using the Accuweigh Above Ground Weighbridge design is that it usually requires more available space than any other type of Weighbridge. The "total installed length" of a short 18 metre weighbridge usually exceeds 30 metres and in some cases, much more, depending on site conditions where the weighbridge is being installed.
The above ground weighbridge has its concrete foundations at ground level, then the weighbridge deck is raised to allow fitting of the weighbridge loadcells and loadcell mounting hardware.
Level approaches and departures are required at both ends of the weighbridge and then incline ramps are needed to allow vehicular access to the weighbridge deck.
The length and height of the weighbridge ramps are largely governed by the physical dimensions of the weighbridge loadcells being used.
It is important to select a brand of weighbridge loadcell that is as short as possible in order to minimise the construction costs of the weighbridge ramps. Also take into account the height of the loadcell mounting hardware as the actual "installed height" for different brands of weighbridge loadcells varies considerably.
For accurate weighings, the trucks/trailers should fit completely onto the weighbridge deck, but if this isn’t possible, then govenrment regulations stipulate the required length of level approaches and departures at each end of the weighbridge deck.
This total installed length of the weighbridge can further impact harshly on available space if the truck also needs to turn onto or off the weighbridge as the truck must be in a straight line entering the weighbridge and cannot begin turn off until it has fully cleared the weighbridge's departure ramp.
Before considering and budgeting for the above ground weighbridge, carefully consider whether the there is room for the "total installed length" of the Weighbridge plus turning space for trucks as required. The overall legal lengths of trucks has steadily increased over time and may continue to do so which could impact further on weighbridges installed into limited spaces.
Accuweigh can also supply the complete range of weighbridge hardware and weighbridge software solutions for any site. Hardware option includes boom gates, electronic identification systems, traffic control lights, driver control stations, personal computers, printers, radio modems, remote displays, and more.
Accuweigh is Australia's largest supplier of weighing and product inspection equipment, with branches in all mainland states.
Our industrial weighing solutions include all types of weighbridges, including truck scales, WIM weighbridges, shipping container scales, wheel weighers, axle weigh pads along with weighbridge software. We also offer wheel wash systems for sale or hire.
We also offer a wide range of weighing scales, including heavy industrial scales, pallet scale and floor scales, trade approved scales, hazardous area scales, load cells, digital weight indicators and remote displays, batching controllers, weigh feeders, animal scales, retail, shop and postal scales.
Our product inspection systems include checkweighers, metal detection equipment for foods, x-ray product inspection systems and product inspection software.
No other Australian company has the capabilities, experience or the resources to better cater for the local market's needs in such a diverse range of associated products.