Australia's #1 industrial directory for equipment & suppliers

Abrasion Resistant Applications

Supplier: Wear Protection Services

Corodur® 56 DIN 8555: MF 10-60-G DIN EN 14700: T Fe 14-60-G High C-, Cr-alloyed flux-cored wire electrode for large surfaces that are exposed to high abrasive mineral wear. The weld deposit has a high percentage of M7C3 carbides

CONTACT THIS SUPPLIER TO FIND OUT MORE

Abrasion Resistant Applications

Corodur® 42
DIN 8555: MF 10-45-CGT       
DIN EN 14700: T Fe 14-45-CGT

C-, Cr-, Ni-, Mo-alloyed flux-cored wire electrode for hardfacing on parts that are exposed to abrasive wear in combination with medium impact stress. The weld deposit is corrosion resistant and machinable. Typical applications are found in the chemical and food industry.


Corodur® 50
DIN 8555: MF 10-50-G       
DIN EN 14700: T Fe 16-50-G

C-, Cr-, Si-, Mn- alloyed flux cored wire on parts which subjected to abrasive wear and medium impact.


Corodur® 51
DIN 8555: MF 10-55-G       
DIN EN 14700: T Fe 15-55-G

CORODUR 51 OA is a flux-cored wire which deposits a martensitic matrix with a high content of Cr-Carbides M7C3 with excellent resistance to abrasion and medium impact up to 450°C. It can be applied whenever high abrasion is expected. Best results are achieved by welding in two layers. The deposit can not be machined or forged. Before overlaying old previously hardfaced surfaces a buffering layer of CORODUR 200 K or CORODUR 250 K is recommended


Corodur® 55
DIN 8555: MF 10-60-GR       
DIN EN 14700: T Fe 14-60-GR

CORODUR 55 is a tubular wire which deposits a high Cr-, C- alloyed stainless weld metal with excellent resistance to abrasion and medium impact. It can be used whenever high abrasion is expected. Best results are achieved by welding in two layers. A maximum deposit thickness of 10 mm is recommended. Before overlaying on old previously hard faced surfaces a buffering layer of CORODUR 200 K or CORODUR 250 K is recommended.CORODUR 55 is a self-shielded open-arc wire .


Corodur® 55 Mo
DIN 8555: MF 10-60-G       
DIN EN 14700: T Fe 14-60-G

C-, Cr-, Mo-alloyed flux-cored wire electrode for hardfacing on parts that are exposed to high abrasive mineral wear. In comparison to Corodur 55, the weld deposit of this electrode has a higher temperature resistance (up to 450°C). Used for pumps, mixer parts and conveyer screws. 

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more