The Leica AT403 Absolute Tracker is a portable coordinate measuring machine (PCMM) that delivers extreme precision over ultra large distances. Its lightweight design and internal batteries allow for complete portability. It is the first tracker ever to have an IP54 rating which enables it to operate in the most demanding environment and still maintain the highest level of precision.
Optional Leica B-Probe handheld point-probing tool is a perfect match for the Leica Absolute Tracker AT403. Uniquely portable and usable the battery-powered cableless operation possibilities of the Leica B-Probe make it a unique proposition in the world of large-volume 3D metrology.
Absolute Laser Tracker | Leica AT402 Features
Dust and Water proof. Independently certified IEC 60529 usage in even the most demanding conditions.
Integrated environmental monitor
Automatic reading and updating of the environmental parameters avoids inaccurate calculations or wrongly input values.
10 Hz Update Dynamic Measurement
For measuring of geometric features like spheres and circles
By combining built in WiFi connectivity and on board battery power, the sensor can operate without any wires connected at all.
Hot swappable battery operation
No need to worry about AC (mains) power - the sensor can run continuously with a new set of batteries able to be swapped in without interruption
Automatic target recognition (ATR)
The ATR allows constant tracking and fine positioning with different reflector types to a typical radial volume of 320 m.
PowerLock beam recovery technology
No need to worry about "breaking the beam": the tracker automatically locks onto the user providing up to 20% time savings over traditional laser tracker technologies
Proven Absolute Distance Meter technology
The most accurate Leica Geosystems distance meter ever: The ADM has a resolution of 0.1 micron and a maximum uncertainty of 10 microns over a full 160 m radial volume.
Quick Release tribrach and precision level to gravity sensor
A built in "survey grade" level to gravity sensor is combined with a simple three screw levelling quick release platform for quick and easy machine setup and relocation.
Integrated Overview Camera to allow on-line steering of the laser tracker for remote or fixed installations
Extremely light and compact: 8.1 kg incl. controller, just over 290 mm tall Measuring where no other laser tracker can go. The controller stays out of the user's way, e.g. attached to the tripod.
Leica Geosystems proprietary quadruple reading absolute angle detection system
The absolute angle encoders provide traceable ISO 17123-3 0.5" accuracy with a 0.07" resolution guaranteeing system accuracy over extremely long ranges.
Power Over Ethernet
Due to its low power requirements the sensor can use POE+ technology that combines power and data into a single off the shelf Cat5 LAN cable.
Industrial Measurement Solutions is Australia's leading provider of portable measurement systems in the fields of metrology inspections and reverse engineering, measurement of vehicle dynamics as well as vehicle and aircraft based mobile mapping.
For more information or a quote on the Leica AT403 Laser Tracker please call or email for a direct reply.
IMS specialises in the supply, training and support of measuring systems in 3 main areas: 3D Measurement in Industry, GPS systems and metrology.
IMS have Metrology Systems suitable for measurements ...