The Asset semi-automatic or bench top model AC-1 Cap Tightener has been the industry standard in semi-automatic cap tightening machinery for over 20 years. Equally at home in small start-up packing operations or in production units of major corporations, the AC-1's low cost, versatility and precise operation have made it a favourite in a wide range of demanding applications. If your production requirement increases, the semi-auto can be converted to a fully automatic conveyor-mounted model AAC-1. From 8mm eye-dropper or cosmetic caps to 100mm closures for wide-mouth food jars, the AC-1's simple controls enable fast set-ups and typical throughputs of around 10 to 20 units per minute.
A single hand-wheel and locking ring allows quick height adjustment for different containers. The universal container guide, adjustable for container size and shape, has an integral activating switch plate - another Asset exclusive feature. Simply place a container against the guide and the tightening chuck automatically descends, tightens, and retracts. Increase or decrease the tightening dwell time to suit the particular application by a turn of the pneumatic timer knob. Simply adjust to give adequate time for the cap to wind down the thread and stop. Adjust the tightening torque by a turn of the air pressure regulator knob. The range of 5 standard interchangeable tightening chuck sizes and 3 standard liner materials will handle most capping applications. Chucks are also available for specialised closures such as tamper-tel, eye dropper, etc. For trigger pump sprays, cream dispensers and mist pumps, and other closures which cannot be tightened from above, the Asset Pumptite Unit is available as a bolt-on optional item- refer to the PT-7 spec page.
The AC-1 semi-auto has all pneumatic operation so it's safe with flammable products. The unit is supplied ready to run by Packserv, requiring only a supply of compressed air like our PA-TM12 air compressor.
Sturdy low maintenance construction
Flameproof, all pneumatic operation
High quality Desoutter air motor drive
Precise torque setting via pressure regulator and gauge
Adjustable container guide with integral activating switch plate
Quick container and cap size changeover
Simple container height, tightening dwell time and torque adjustment without tools
Bench-top bottle capper (15Kgs approx)
Air operated (we can supply air compressor if required)
Various chucks and chuck sizes to suit most caps
Fully torque adjustable
Suitable for round or square containers
10mm-100mm standard chucks, others can be made
Screw, pump, mist, trigger, push and snap closures
Capping 10-20 units per minute (guide only)
Comes in a conveyor-mountable automatic version
Suitable for food and pharmaceutical use
All 316 stainless steel and aluminium construction
400kpa (60psi) pressure requirement
Can be fully washed down
Fast change over of bottles/containers
No tools required for setting adjustments
Check out more information: https://bit.ly/32U35H8
Packserv | Packaging Machinery Hire / Rental
Packaging Machinery Hire and Equipment Rental
Packserv is a Packaging Machinery Hire and Packaging Solutions company which provides on demand rental equipment, technical support and many other services ...