The health and safety benefits are huge using our new system; accidents will be reduced if not eradicated completely through the use of this product.
The new system is a (brace-less alloy tower system) which removes many of the manual handling problems associated with current systems using the 3T method for erecting and dismantling.
It also offers collective protection (built in guard rail system) which raises health safety level to best practice as confirmed by the HSE.
A user friendly system which can be erected in half the time.
Due to its unique advanced guardrail system the tower can be erected or dismantled without exposing operatives to a fall from height. Given the plethora of solutions available and the myriad benefits and drawbacks presented by each, a number of companies had decided to conduct a review of use and supply of mobile scaffold towers, in relation to internal work at height up to 4.5 metres.
This is primarily between the ceiling grid and the underside of the floor, above where the vast majority of mechanical-pipe and electrical-cable installation are undertaken.
BetaGuard Australia | Access Equipment & Height Safety Systems
BetaGuard Australia specialise in providing collective protection for safe working at low level heights, limiting the risk of fall at all times whilst working at low levels such as working reach of up to 3 meters. The DeltaDeck® low level access work platform is one complete unit that assembles and dismantles in less than one minute, allowing easy transportation and storage.
With multiple working heights (to a maximum of 870mm) to choose from, the DeltaDeck® low level access solution is ideal for those needing flexibility when working at heights of 3m and below. The DeltaDeck® low level access unit is suitable for many finishing trades such as electrical contractors as a safer alternative to working off ladders.
With the ever tightening OH&S requirements in relation to working at any height and the 3 points of contact the DeltaDeck offers a much safer alternative.