The control boxes CA30 and CA40 have been developed as part of a new control box platform for the care and rehab industry.
The control boxes can be mounted separately on the application by means of unique slide-on brackets, but also on several actuator models using a specially designed actuator bracket.
The control boxes CA30 and CA40 are equipped with SMPS (Switch Mode Power Supply) for worldwide operation and optimised performance.
The power outputs for channels 1 – 4 are located inside the box. The box has three cable exits, making it easy to choose the most suitable cable layout in the application. The control box lid has a double cover and cable lock function.
FETs (Field-Effect Transistors), IPX6 Washable DURA™ and a battery port are all standard options.
The CA30 and CA40 communicate with the actuator by means of the built-in end stop switches.
Power supply: Universal, 120 W power output (Switch Mode Power Supply) 100-240 VAC, 50/60 Hz
Mains indicator: Yes
Actuator interface: 2 or 4 channels, 6-pin minifit
Battery interface: 1 port, 4-pin minifit, (Output 300 mA - no actuator running)
Standby power: Approx. 0.5 W (230 V)
Colour: Light grey (RAL 7035)
Output short circuit protected: Yes
Control concept: FET (no relay noise)
Duty cycle: 10 % - 2/18 min. on/off continuos use. Maximum power is 120 W for 80 seconds and 60 W for 40 seconds at 25°C
Weight: Low weight 0.5 kg
Actuator compatibility: All standard actuators (signal and power switch)
Battery charger: Battery input available, No charger, but supports battery with internal charger
PCP version: PCP 1.0
IP-Rating: IPX6 Washable DURATM
LINAK | Electric Linear Actuator Systems
LINAK electric linear actuator systems - Lifting columns and height adjustment
Electric Linear Actuation from LINAK Australia
• LINAK Australia is a subsidiary of LINAK, an international company ...